Please Note: Photo is for illustration purposes only. You will be shipped a bike with the components listed below.
Jenson USA can ship Yeti products to delivery addresses in the United States, Canada, Brazil and Mexico.
Yeti SB-66C X01 Bike 2014
The visually stunning carbon fiber construction of the SB-66 Carbon will capture your attention like love-at-first-sight. It's light, fast and efficient everything you've ever wanted in an all mountain bike! As you move in closer for a better look you’ll begin to notice this isn’t just another single pivot but but and an innovative suspension design called Switch Technology. The oversized main pivot actually contains a second pivot (lower pivot of the swing arm) that is offset within the main. This eccentric mechanism switches direction as the bike moves through its travel creating an optimized wheel path without unexpected spikes or wallows. The Yeti SB 66 won the “Mountain Bike” editor’s choice award.
At the beginning of the travel the eccentric link is rotating in a rearward direction, guiding the lower pivot of the swing arm rearward. This counter-clockwise motion coupled with the initial rearward wheel path creates an excellent pedaling platform, making the SB-66 Carbon pedal and climb crisply without sacrificing small bump sensitivity. The mid stroke has a flat linear shape, creating a large “sweet spot”, allowing the suspension to react better to bigger hits. Once the travel reaches about 100mm, the eccentric link starts to rotate in the forward direction. This means the rate at which the chain stay grows drops off quickly, allowing the suspension to work independently of chain forces. Because the suspension isn’t being impeded by chain growth in the last third of the travel, the smooth feel in the middle continues all the way to full compression without a harsh bottom out feeling.
Every detail on the SB-66 Carbon screams, “Ride me!” From the Fox K+ CTD Adjust rear shock to the carbon fiber frame construction. Even small details like an externally splined BB shell, tapered headtube and Enduro Max bearings make all the difference.
X01 brings SRAM’s 11 speed mountain drivetrain to the masses with a lower price point without sacrificing performance. X01 is slightly heavier than XX1 (the difference is under 100g) but is still much lighter than any 2x10 setup out there while still offering a wide gear range thanks to the 10-42T X-Dome cassette. The new X01 cranks feature carbon arms and a removable spider (much like the X0 cranks) along with SRAM’s new X-Sync tooth profile which acts as a built in chain guide system. The rear derailleur’s X-Horizon design eliminates any vertical movement which reduces shift forces and prevents “ghost shifting”. The X01 drivetrain brings the latest and greatest SRAM technologies to your new complete bike offering a simple, clean, and more importantly, reliable drivetrain to your Yeti SB-66C.
2014 Yeti SB-66C X01 Bike Specifications
- High Modulus Carbon Fiber Main Frame and Swingarm
- Switch Technology Suspension System
- Fully Sealed Eccentric System
- Oversized Pivot Pins with Enduro Max Bearings
- Splines BB Shell Accepts Removable ISCG 03/05 Tabs
- Internal Cable Routing on Rear Triangle
- Custom Replaceable Rock Guards for Yoke and Down Tube
- Cable Stops for Height Adjustable Seat Post
- Rear Trianlge Optimized for 12x142mm Thru Axle
- 30.9mm Seat Post, 35.0mm Seat Clamp
- 44mm/56mm Tapered Headset
- High-Direct-Mount Front Derailleur
- Fits up to a 2.4" Tires
- Post Mount Rear Brake Mount (160mm), Fits up to a 185mm
- 166 Q-Factor
- Rear Shock uses 2.5" stroke, 8.5" eye-to-eye
- 2-year Manufacturer's Warranty
2014 Yeti SB-66C X01 Bike Components
||Yeti ARC Carbon, High Modulus Carbon Fibe Main Frame and Swingarm
||Fox 34, 160mm travel, Kashima coating, 15mm thru axle
||Cane Creek, 44mm/56mm tapered headset
||Stan's NoTubes ZTR Crest, 15mm Front and 12x142mm Rear
||SRAM XO1 32T 11spd
||SRAM XO1 11spd
||SRAM XO1 11spd
||Avid Elixir 9 hydraulic disc
||Easton Havoc Carbon
Note: components are subject to change without notice.
2014 Yeti SB-66C X01 Bike Geometry (160mm Fork)
|Seat Tube Length
|Effective Top Tube Length
|Head Tube Length
|Head Tube Angle
|Seat Tube Angle
|Chain Stay Length
|Suggested Rider Height
||5'3" - 5'7"
(160 - 171cm)
|5'7" - 5'11"
(171 - 180cm)
|5'11" - 6'3"
(180 - 191cm)
|6'3" - 6'6"
(191 - 198cm)
Jenson USA ships worldwide, including APO/FPO addresses. For a quote, simply add the items you are interested in to your shopping cart and look for the "Shipping Options" box. You don't have to login or create an account to see shipping charges.
Some manufacturers restrict where we can ship their products. If this item has shipping restrictions, they are listed below. If you'd like to buy an item that we cannot ship to your preferred address, we can accept your foreign credit card and ship to a USA address for you.
Get free shipping with your $50 purchase today when you choose Standard Shipping at checkout. Please note this offer is only available to physical shipping addresses in the 48 continental United States (no PO Boxes), and oversize charges still apply on some heavy/large items
Due to manufacturer restrictions, this product cannot be shipped to the following locations:
- American Samoa
- Antigua and Barbuda
- Brunei Darussalam
- Burkina Faso
- Cape Verde
- Cayman Islands
- Central African Republic
- Congo, The Democratic Republic
- Costa Rica
- Czech Republic
- Dominican Republic
- El Salvador
- Equatorial Guinea
- Faroe Islands
- French Guiana
- French Polynesia
- Hong Kong
- Korea, Republic of
- Lao People's Democratic Republic
- Netherlands Antilles
- New Caledonia
- New Zealand
- Papua New Guinea
- Saint Kitts and Nevis
- Saint Lucia
- San Marino
- Saudi Arabia
- Sierra Leone
- South Africa
- Sri Lanka
- Syrian Arab Republic
- Tanzania, United Republic Of
- Trinidad and Tobago
- Turks and Caicos Islands
- United Arab Emirates
- United Kingdom
- Virgin Islands, British
- Wallis and Futuna