FREE SHIPPING OVER $50*
365 DAY RETURNS
Need Gear Advice?
Our Gear Advisors are Ready to Help.888-880-3811
Prices shown in currencies other than USA Dollars are estimates based on current exchange rates. We will charge your credit card in USA Dollars on the day your order is shipped, and the conversion to your local currency will be done at the prevailing rate by your credit card issuer.
Shipments outside the USA are declared as “bike parts” for customs purposes and will include the actual amount paid for merchandise and shipping. Jenson USA will not mark your parcel as a “gift”, declare a value lower than the actual price paid, or otherwise prepare false customs information.
Five minutes on the Diamondback Mission 1 27.5 and you'll be hooked. Packing 160mm of point-and-shoot full suspension travel, this 27.5” wheeled all-mountain bike wants to tear into rough, steep terrain, looking for hits and drops that would surely have the amateurs searching for a B-line. Crushing it downhill is one thing, but the aspiring enduro racer needs to be able to climb efficiently too. Not a problem for the Mission 1! The Fox Float equipped Knucklebox Migration suspension design reduces pedal induced motion without compromising small bump compliance, delivering you to the top efficiently and comfortably so you have more energy for another rip back down. The Mission takes advantage of the growing popularity of the 27.5" wheel size with this latest version, offering a ride that splits the difference of 29" and 26" wheels, giving you the best of both worlds. With 27.5", you retain the snappy handling of 26" wheels combined with the added obstacle clearance and acceleration typical of the 29er platform. Get on board, this ride is taking off and you don't want to be left behind!
For 2016, Diamondback is shaking up the suspension game with their newly improved Knucklebox platform. We are now in the era of KnuckleBox Migration. This means that Diamondback has refined the KnuckleBox platform to leverage even more performance from their already proven design. By migrating all the suspension components forward in the frame, travel is increased to 160mm and plenty of room is made for nimble, fast rolling 27.5” wheels. A newly designed, inverted KnuckleBox linkage and DB's proprietary single sided hardware round out this impressive new signature all-mountain, full suspension ride.
The KnuckleBox, or bell crank, is the core of Diamondback's single-pivot, four-bar suspension platform. Optimally placed pivots equate to a low leverage ratio, and ultimately to superior pedaling efficiency and small-bump compliance. This also allows the shock to work more efficiently and reduces pedal induced motion. It further reduces overall load on the system promoting improved shock and bearing life. Placing the KnuckleBox low within the frame lowers the bike’s center of gravity allowing it to track and corner better.
Wheel rate is the effective spring rate measured at the wheel, and it is a crucial aspect when considering suspension systems. A benefit of the KnuckleBox four-bar linkage is increased control over the wheel rate. Diamondback works closely with Fox, first obtaining the spring rate curves of their shocks so they can then optimize their wheel rates to be linear, to slightly progressive. The resulting ride yields superb small bump compliance, more perceived travel, and excellent bottom-out protection.
For the Mission 1 build, Diamondback chose to incorporate an array of sensible components that compliment and further enhance the impeccable design of the Mission 1 27.5. Suspension duties are handled beautifully by a plush pair from Fox Racing Shox. A Fox 34 Float Air fork with 160mm travel soaks up everything from small bumps to daring drops and rock gardens. FOX technology allows you to fine tune your fork's performance to match your terrain, giving you everything from plush rebound on aggressive sections to stability and minimal bob when climbing. The rear Fox Float Performance DPS Air keeps things tame in the rear, offering convenient remote lever access to the 3 travel positions and plenty of travel to absorb anything that comes your way.
The Mission 1's drivetrain is a practical blend of tested workhorse components, resulting in a pedaling platform that shreds as hard as you plan to push it. A 10 speed SRAM X7 Type 2.1 rear derailleur, SRAM X5 shifter, and SRAM 11-36t speed cassette form the sturdy core of the Mission 1's drivetrain. This simple, but efficient drivetrain cuts the fluff where necessary leaving only a reliable, hard-wearing drivetrain intact, so you can get to work exploring and spend less time all glassy eyed staring at your bike in the garage. A perfect blend of performance and practicality, the Mission 1's drivetrain is the steady heartbeat of the bike. A Race Face Ride crankset delivers all the power you need to climb efficiently and hammer through speedy sections of the trail. Paired with a 30t narrow-wide chainring, this responsive pedaling platform offers excellent chain retention and a wide range of gearing that will take you up and over all sorts of terrain. Shimano M447 hydraulic disc brakes offer all of the stopping power needed to handle daring terrain and modulate speed through tricky descents. The Mission 1 rolls confidently on a bombproof set of tubeless compatible alloy disc wheels paired with a set of the ever popular Schwalbe Hans Dampf 27.5 x 2.35" tires. Diamondback rounds out the cockpit of the Mission 1 with a full complement of DB branded components, ensuring that when you take a seat at mission control, everything is dialed!
Reviews: Pink Bike
|Frame||Mission All Mountain 27.5, 160mm 6061-T6 Weapons Grade Aluminum w/Hydroformed Top Tube, Butted / Formed Down Tube / Seatstays, Under Arch Seatstay bridge, Tapered Head Tube Knuckle Box Technology, ISCG 05, 142x12mm E-Thru Axle Drop out|
|Fork||Fox 34 Float, 160mm Travel, open cartridge, 3 Position Lever w/ ext. rebound, 1.5 Butted Tapered Steerer, 34mm Easton Aluminum Stanchions, w/QR15 Thru Axle|
|Rear Shock||Fox Float Performance DPS, 3 position lever, "LV" eyelet, 8.5x2.5" Air, DB Mission Spec, w/rebound adj|
|Headset||FSA No57E Taper 1.5 / 1 1/8"standard cups, Sealed Cartridge|
|Shifters||SRAM X5 10sp|
|Rear Derailleur||SRAM X7 Type2.1|
|Crankset||Raceface Ride 30T NarrowWide Single Ring|
|Bottom Bracket||Raceface Outboard Bearing|
|Cassette||SRAM PG1020 (11-36t)|
|Brakes||Shimano M447 Hydraulic Disc, 180mm/180mm Rotors|
|Wheelset||DB AM320 Doublewall Disc, 32h Tubless Compatible|
|Tires||Schwalbe Hans Dampf 27.5x2.35, Performance|
|Handlebar||DB35, 780mm width, 15mm rise, 35mm barbore|
|Stem||DB35, 50mm length, 35mm barbore|
|Grips||DB4L "Lock on" 135mm Kraton|
|Seatpost||DB Micro Adjust 30.9mm|
|Seat Clamp||Bolt-On Style|
|Saddle||DB Race M-series saddle|
|Intended Use||Trail, All Mountain, Enduro, Gravity|
Note: Components are subject to change without notice.
|A: Seat Tube Length||15”||17”||19”||21”|
|B: Effective Top Tube||22”||23”||24”||25”|
|E: BB Height||342mm||342mm||342mm||342mm|
|F: BB Drop||2mm||2mm||2mm||2mm|
|G: Head Tube Length||105mm||105mm||120mm||140mm|
|H: Head Tube Angle||66.5°||66.5°||66.5°||66.5°|
|I: Seat Tube Angle||73°||73°||73°||73°|
|J: Standover Height||30.0”||30.5”||31.5”||32.0”|
|K: Chainstay Length||451mm||451mm||451mm||451mm|