Note: You and your friend's email addresses are only used once as a referral. We will not collect or store the email addresses.
The Fox Talas is the ultimate fork for variable terrain. Flick the Talas knob into the short position and you’ll have 90mm of travel that’ll keep you balanced and steady as you climb up the back side of the mountain. 90mm of travel gobble up bumps and helps to keep your wheels glued to the ground on climbs. The law of gravity states that: what goes up must come down. So, switch the Talas knob back and you’ll have 120mm of buttery smooth travel, perfect for mowing down rocks, branches, roots, and anything that may cross your path. For 2014, Fox updated the damping tunes for even greater control. The most notable change for 2014 was the remote redesign. The remote is much smaller and sleeker. It also requires less cable tention and has superior actuation.
To ensure that your travel is buttery smooth, Fox has added Kashima coating to the uppers. Kashima coating is a hard anodizing process that fills in any micro pores in the material creating a smoother surface, in comparison to a hard anodization on prior versions. Its distinctive gold color is backed by its high performance attributes including extreme durability as well as an extremely smooth feel. The whole purpose and value of the Kashima coating is its friction reduction properties.
The Fox Talas features the FIT cartridge. FIT stands for Fox Isolated Technology. FIT technology employs a bladder system that keeps the oil and air from mixing to provide optimal performance in all riding extremes. Since the FIT cartridge uses much less oil, the weight of the fork is significantly less than one with an open bath style.
The Fox Talas utilizes Fox's CTD technology. CTD is short for Climb, Trail, and Descend. It is a three position on the fly system that provides three distinct compression dampings that you’d typically need on an average ride. CTD is extremely useful on the trail. The rider is quickly able to flip the lever between the three positions, and which results in being used numerously throughout the ride. CTD is much faster than the older click system, where the rider would have to stop and click through to find the proper setting.
Climb mode has the firmest low- speed compression, which maximizes pedaling efficiency and has minimal suspension movement. Internally, the oil flow is restricted, and can only flow through the Climb port, which limits the suspension’s movement. In the event of a hard impact, the spring loaded blow- off valve will allow the damper to go into its travel. Trail mode provides an optimal blend of pedaling efficiency and control on variable terrain. The oil flow is opened to the mid and high speed compression shim stack. Descend mode provides the rider with the most active suspension. Descend mode is an optimized low- speed compression setting which provides the perfect balance of control and plushness for steep, aggressive descents. Oil is able to flow through the high, mid, and low speed ports. This version of the Talas comes with the remote. Attach the remote to the handlebar and easily switch through the CTD modes. Link your Fox rear suspension to the lever as well, and enjoy matched front and rear settings. This makes it easy to change the bike’s suspension characteristics on- the- fly.