Free Shipping Offer

Get free Standard Shipping with your $50 purchase today!

Please note this offer is only available to physical shipping addresses in the 48 continental United States (no PO Boxes), and oversize charges still apply on some heavy/large items.

|
|
WE'RE HIRING!
Join Our Team ›
(6)

Hope Pro 2 Evo XD Driver

Item #: HU241E00
From USD$79.99 SAVE 26% USD$108.38 msrp
Qty
Found a Lower Price?

Hope Pro 2 Evo XD Driver

Converting your Hope hub to accept 11 speed SRAM drivetrain? You’ll need the hope Driver body for Sram XX1, X01 or X1 cassettes.

  • Compatible with Hope hubs
  • Complete unit
4.3 / 5.0
6 Reviews
5 Stars
4 Stars
3 Stars
2 Stars
1 Stars
2
4
0
0
0
Hope XX1 freewheel
Be careful order the freewheel with the required end caps (QR, 15mm or 20mm) as they are XX1 freewheel specific. This option was not listed on the Jenson website, (I got the wrong ones). Also the alloy cassette mounting thread looks to be a little fragile, take care when mounting the cassette.

CONS: Limited Compatibility
February 28, 2013
Location:
Brisbane, Australia
Works well, little tough to install
Bought a new bike recently which came with all X1 components. Rather than keep the factory wheels, I did some research and determined my wheelset with the Hope Pro2 Evo (40t) would need this hub driver to make the switch.

There are plenty of videos around to help you but not (m)any of them deal specifically with this conversion. One thing they seem to gloss over a little is that the black plastic dust guard has to be forced inside the machined lip of the hub body. Hope sells a special tool (and Jenson may have it - I didn't know it was a thing, so I didn't look for it) whose sole function is to seat this dust guard. I'm sure it makes the job easier, but you can get by without it unless you're seating these all the time.

Basically put, the dust guard has to be squished into the rim. While you CAN spend the money on the tool, it's actually fairly easy to install yourself using a flathead screwdriver or some other implement which won't harm the dust guard (it's pretty tough plastic). The technique I used was more or less like tire mounting. Start by seating one side, then work your way around. It (should? may?) make an audible twang when it's fit securely. Once that's done, the cassette body should spin without any interference, and you're ready to mount your cassette. Hope (ha!) this helps!

PROS: Attractive Design, Lightweight
September 10, 2015
Location:
New Hampshire
Very easy to install and included new pawls and springs
XC

PROS: Durable, Lightweight, Easy To Install, Attractive Design
March 18, 2016
Location:
OK
I would buy this product again.
Product was packaged properly and arrived as described.
July 6, 2016
Location:
Quad Cities USA
Works great with Hope Pro2 QR and XX1
Recommended to have the seal tool HTT175 to install on hub (video on Hope Website).

PROS: Easy To Install
April 8, 2013
Location:
Colorado
Good upgrade
Just switched to a 1x11 system. So far so good. You do need the seal tool to install this properly. Also the 12x142 endcap needs to be installed before you put on the cassette and clearance is really tight. The 135 qr endcap needs to be installed after the cassette. No creaking or any issues so far
November 7, 2016
Location:
Adirondack Mountains

Q & A

Start typing your question and we'll check if it was already asked and answered. Learn More
Browse 2 questions Browse 2 questions
Is this compatable with the new Pro 4 hubs?
Ryano on Jun 1, 2016
Is it comes with 135 QR end cap if I buy it? Mine is XC hardtail bike.
AG on May 23, 2016

Jenson USA ships worldwide, including APO/FPO addresses. For a quote, simply add the items you are interested in to your shopping cart and look for the "Shipping Options" box. You don't have to login or create an account to see shipping charges.

Some manufacturers restrict where we can ship their products. If this item has shipping restrictions, they are listed below. If you'd like to buy an item that we cannot ship to your preferred address, we can accept your foreign credit card and ship to a USA address for you.

Get free shipping with your $50 purchase today when you choose Standard Shipping at checkout. Please note this offer is only available to physical shipping addresses in the 48 continental United States (no PO Boxes), and oversize charges still apply on some heavy/large items

Related Products
DT 240S Left Adaptor MTN QR Hubs
This left adaptor end cap for DT Swiss ...
DT 240S Left Adaptor MTN QR Hubs
DT 240S Left Adaptor MTN QR Hubs
Description:
This left adaptor end cap for DT Swiss fits most DT Hubs including the 240, 350 and 440 and is also compatible with the Spline series of wheels. Choose the appropriate right side adaptor, (sold separately) depending on whether you ...
DT 240S Right Adaptor 130/135 QR Hubs
This right side adaptor end cap for DT ...
DT 240S Right Adaptor 130/135 QR Hubs
DT 240S Right Adaptor 130/135 QR Hubs
Description:
This right side adaptor end cap for DT Swiss fits most DT Hubs including the 240, 350 and 440 and is also compatible with the Spline series of wheels. You will also need the appropriate left side adaptor, (sold separately) ...
Stan's NoTubes 3.30 Type 2 XD Driver Kit
No Tubes 3.30 Type 2 XX1 Conversion Kit ...
Stan's NoTubes 3.30 Type 2 XD Driver Kit
Stan's NoTubes 3.30 Type 2 XD Driver Kit
Description:
No Tubes 3.30 Type 2 XX1 Conversion Kit XD Driver/Freehub for SRAM 11 Speed MTB Cassette, works on existing Stan's 3.30 hubs! Includes: XD Freehub, spacer, axle, non-drive and drive side end cap, 3 6802 chrome steel bearings.

Need Gear Advice?

Our Gear Advisors are Ready to Help

Email Specials

Sign up for our weekly newsletter delivered via email.

Keep Pedaling

Free Shipping Offer

Get free Standard Shipping with your $50 purchase today! Just choose Standard Shipping during checkout.

Please note this offer is only available to physical shipping addresses in the 48 continental United States (no PO Boxes), and oversize charges still apply on some heavy/large items.