|

Free Shipping Offer

Get free Standard Shipping with your $50 purchase today!

Please note this offer is only available to physical shipping addresses in the 48 continental United States (no PO Boxes), and oversize charges still apply on some heavy/large items.

(11)

Park SG-6 Threadless Saw Guide

Item #: TL707C00
USD$41.36 SAVE 10% USD$45.95 msrp
Qty
In Stock
Found a Lower Price?

Park SG-6 Threadless Saw Guide

Designed to ensure a straight, clean cut on threadless forks, the SG-6 fits 1", 1-1/8" and 1-1/4" forks. A clean, straight cut is critical to ensure a properly adjusted threadless headset! Simply slide the guide onto any threadless fork, clamp it down, and cut using the narrow cutting slot. Heat treated for long life. For threaded forks, use SG-5 Guide Set which cleans the threads after cutting.

4.7 / 5.0
11 Reviews
5 Stars
4 Stars
3 Stars
2 Stars
1 Star
8
3
0
0
0
great purchase
I bought a new Fox front shock and really didn't want to "wing" it on the cutting the tube, great little tool well worth the money, probably will not use but once or twice ....

PROS: Rugged, Simple, Versatile, Good Grip
September 22, 2015
Location:
Pasadena, TX
Does the job
Can be used to cut a wide variety of things including seat posts and handle bars. Out of the box a carbon fiber cutting blade does not fit through the slot, but because you are able to disassemble the guide I was able to add two thin washers over the bolt. It does take a minute though, so if you're cutting things all day long that are both aluminum and carbon it could become an annoyance adding and removing spacers. For the home shop it's perfect.
January 5, 2016
Location:
Whistler BC
Works as Designed
Purchased for my first attempt at a bike build up and used on a Rockshox Pike. The guide took the worry out of ensuring I had a straight cut on the fork steerer tube. Guide clamped down snuggly and ensured the hacksaw cut straight, both horizontally as well as vertically. The guide seems well built and I expect it to last my lifetime.

PROS: Rugged
July 31, 2014
Location:
Round Rock, TX
GREAT Tool for cutting handlebars!
I wanted to cut my 740mm carbon handlebars down to 710mm. This tool works PERFECTLY for such a task and gives a nice clean end to your handlebar (vs manually "eyeing" it in a vice). Just remember to use a 30 tooth hacksaw (not 24 tooth) and the cut will be nice and clean!
October 15, 2015
Location:
Knoxville, TN
Best tool for cutting steerer tubes - BY FAR!
I've cut a lot of steerer tubes and this is the best/most precise tool for the job. Was worried about how it clamps but the actual clamp mechanism is bent to the curvature of the tube and is wide enough to not dent/mar it when clamped tight = no damage. Super happy with the results and can take off very small sections to fine-tune the length as needed.

PROS: Precise, Rugged

CONS: Pricey

BEST USES: Mountain Bikes, Keep In the Garage
April 19, 2016
Location:
Portland, OR
probably don't 100% need it but why risk your new forks
lots of ways to cut a steerer but why risk it to save a few bucks, no time waisted filling off burs... nice clean cut with a hack saw. also works on bars and seat posts

PROS: Rugged, easy to use, Versatile

BEST USES: City Bikes, Keep In the Garage, Mountain Bikes
August 20, 2016
Location:
New Jersey and Pittsburgh
A tool you can do without
Great for those Do-It-Yourselfers like me who want to upgrade their forks. Works like a charm. Guides hacksaw in cutting tube with a near perfect flat surface

PROS: Rugged
August 10, 2014
Location:
San Jose, CA
Works perfect
I used this guide to cut my carbon steer tube. It worked perfectly. The clamp held the steer tube well

PROS: Easy to use, Holds Steer Tube Well, Precise

CONS: Had To Buy A Vise
October 6, 2012
Location:
Kansas City
Great tool Just expensive
The tool is great-easy to use and guides the saw very easily as you cut.
My complaint is that it is difficult to see the line you mark on the steerer tube to make the cut. Other than that its fine. And it is expensive for something you use once.

I cut a Niner RDO carbon 29er fork steerer.

PROS: Good Grip

BEST USES: Road Bikes, Mountain Bikes, Keep In the Garage
February 5, 2016
Location:
Michigan
guide to great forks
This guide does an excellent job keeping your cuts straight. If you're only going to cut a steerer tube once or twice an industrious person can come up with a DIY solution, but if you're cutting down forks on a regular basis and time is an issue this is the tool for the job. Cutting with a saw does a much cleaner cut than using a pipe cutter which can flare the tube.

PROS: Accurate

CONS: Price
October 5, 2012
Location:
Canada

Q & A

Start typing your question and we'll check if it was already asked and answered. Learn More
No questions have been asked about this item. Be the first!

Jenson USA ships worldwide, including APO/FPO addresses. For a quote, simply add the items you are interested in to your shopping cart and look for the "Shipping Options" box. You don't have to login or create an account to see shipping charges.

Some manufacturers restrict where we can ship their products. If this item has shipping restrictions, they are listed below. If you'd like to buy an item that we cannot ship to your preferred address, we can accept your foreign credit card and ship to a USA address for you.

Get free shipping with your $50 purchase today when you choose Standard Shipping at checkout. Please note this offer is only available to physical shipping addresses in the 48 continental United States (no PO Boxes), and oversize charges still apply on some heavy/large items

Customers Also Bought
From USD$0.99
USD$22.49
SAVE 10%
MSRP USD$24.95
USD$37.76
SAVE 10%
MSRP USD$41.95
USD$23.36
SAVE 10%
MSRP USD$25.95
Related Products
Park Tool SG-7.2 Oversized Saw Guide
Park Tool SG-7.2 Oversized Saw Guide Accurately guides ...
Park Tool SG-7.2 Oversized Saw Guide
Park Tool SG-7.2 Oversized Saw Guide
Description:
Park Tool SG-7.2 Oversized Saw Guide Accurately guides a hacksaw to cut aero-shaped seat masts and seat posts up to 2.75" (70mm), as well as fork steerer tubes and other round tubes from 1-1/16" to 1-3/4" (27mm to 45mm). The ...
Park Tool BBT-30.3
The BBT-30.3 includes a bearing remover, which slides ...
Park Tool BBT-30.3
Park Tool BBT-30.3
Description:
The BBT-30.3 includes a bearing remover, which slides through the bottom bracket shell and into the bearing so it can be tapped out with a hammer. The set also includes two installation bushings #668 designed for the BB30 and PF30 ...
Park Tool Hacksaw
Hacksaw All aluminum die cast frame construction, blade ...
Park Tool Hacksaw
Park Tool Hacksaw
Description:
Hacksaw All aluminum die cast frame construction, blade tension adjuster and comfortable handle make this the perfect hacksaw for the shop. SAW-1 includes one blade and accepts any 12” (300mm) hacksaw blade.

Need Gear Advice?

Our Gear Advisors are Ready to Help

Email Specials

Sign up for our weekly newsletter delivered via email.

Keep Pedaling

Free Shipping Offer

Get free Standard Shipping with your $50 purchase today! Just choose Standard Shipping during checkout.

Please note this offer is only available to physical shipping addresses in the 48 continental United States (no PO Boxes), and oversize charges still apply on some heavy/large items.