Keep pedaling
Free Shipping Over $50*

Free Shipping Offer

Get free Standard Shipping with your $50 purchase today! Just choose Standard Shipping during checkout.

Please note this offer is only available to physical shipping addresses in the 48 continental United States (no PO Boxes), and oversize charges still apply on some heavy/large items.

Park Tool BBT-90.3

USD$42.26 10% off USD$46.95 msrp
Item #: TL265H00
USD$42.26 10% off USD$46.95 msrp
Found a Lower Price?
Availability In Stock
Quantity
PressFit Bottom Bracket Bearing Tool Set
Designed to remove and install the bearings and bearing units used in BB90, BB92, Shimano Press Fit, SRAM Press Fit GXP, Race Face Press Fit and other press fit bottom bracket systems.  The BBT-90.3 includes two installation bushings, which are used in conjunction with an HHP-2 or HHP-3 Bearing Cup Press to press the bearings into the frame.   Also includes a bearing removal tool, which slides through and expands behind the bearing (like a head cup remover) so it can be tapped out with a hammer.

Note:  When the BBT-90.3 becomes available, the current BBT-90 Removal Tool for Press Fit Bottom Brackets will be discontinued.

REVIEW SNAPSHOT®

by PowerReviews
Park Tool BBT-90.3
 
4.6

(based on 8 reviews)

Ratings Distribution

  • 5 Stars

     

    (5)

  • 4 Stars

     

    (3)

  • 3 Stars

     

    (0)

  • 2 Stars

     

    (0)

  • 1 Stars

     

    (0)

100%

of respondents would recommend this to a friend.

Pros

  • Rugged (4)

Cons

No Cons

Best Uses

  • Keep in the garage (5)
  • Mountain bikes (3)
  • Road bikes (3)
    • Reviewer Profile:
    • Avid cyclist (5)
    • Was this a gift?:
    • No (6)

Reviewed by 8 customers

Sort by

Displaying reviews 1-8

Back to top

 
5.0

Excellent tool

By cycle4jesus

from TN

About Me Competitive Cyclist

Verified Buyer

Pros

  • No Bearing Damage
  • Rugged

Cons

    Best Uses

    • Self-service Mechanics

    Comments about Park Tool BBT-90.3:

    Took less than 5 minutes to remove original bottom-bracket. Used all-thread and provided bushings to install new bottom bracket. Care must be taken to keep bearing shells aligned when installing! Best when used with a hammer for removal, not a mallet.

    • Was this a gift?:
    • No
     
    4.0

    Great Bottom Bracket Tool

    By Jay

    from Fontana, CA

    About Me Avid Cyclist

    Verified Buyer

    Pros

    • Good Grip
    • Rugged
    • Versatile

    Cons

    • Price

    Best Uses

    • Keep In the Garage
    • Mountain Bikes
    • Road Bikes

    Comments about Park Tool BBT-90.3:

    Great tool for pressfit bottom bracket removal. First time using this tool and I was done in a matter of minutes. Nothing like having the right tool for any job!

    • Was this a gift?:
    • No
     
    4.0

    You need another tool to install

    By Eric P.

    from Clifton Park, NY

    About Me Avid Cyclist

    Verified Reviewer

    Pros

    • Rugged

    Cons

    • Expensive

    Best Uses

    • Keep In the Garage

    Comments about Park Tool BBT-90.3:

    You need both this tool and a press tool like the HHP-2 to install a press fit bottom bracket on a brand new frame.

    This includes the tool used to remove the bottom brackets and a pair of #669 bushings used to install a press fit bottom bracket that are not included with HHP-2.

    Both tools are of excellent quality, but the fact that the bushings don't come with the HHP-2 mean that you have to spend a lot of money on two separate tools just to install a bottom bracket on a new frame. While I'm normally one to be willing to pay for a good Park Tool, in this case I feel the price isn't commensurate with the product, so I'm deducting a star for that.

    • Was this a gift?:
    • No
     
    5.0

    Worked Perfect

    By Yes

    from HiDesert

    About Me Avid Cyclist

    Verified Buyer

    Pros

    • Rugged

    Cons

      Best Uses

      • Keep In the Garage
      • Mountain Bikes
      • Road Bikes

      Comments about Park Tool BBT-90.3:

      Popped the bearings out easy. The included cups combined with some all thread, couple nuts and washers and the install was a snap!

      • Was this a gift?:
      • No
       
      5.0

      Aweswome!

      By Al

      from SoCal

      About Me Avid Cyclist

      Verified Reviewer

      Pros

      • It Does The Job

      Cons

      • None

      Best Uses

      • Duh
      • Keep In the Garage

      Comments about Park Tool BBT-90.3:

      Awesome tool! Read the reviews and was a little worried, lot o BB's there. Old was out and new was in. 20 minutes tops!!

      • Was this a gift?:
      • No
       
      4.0

      Great product, simple and easy to use

      By Simon

      from Melbourne, Australia

      About Me Avid Cyclist

      Verified Buyer

      Pros

      • Easy to use

      Cons

      • Other Tools Required

      Best Uses

      • Keep In the Garage
      • Mountain Bikes
      • Road Bikes

      Comments about Park Tool BBT-90.3:

      This tool is used for removing press-fit bottom brackets. Its a simple and easy-to-use tool. Simply thread the pointed end of the tool through one side of the bottom bracket and continue to pull through until the splayed end pops through to the inside of the bottom bracket. Then you need to apply some pretty solid taps on the pointy end...the press-fit bearing will ease out the other side. The down side is that to then fit the new bottom bracket, you need a separate tool to press it into the frame...then the cups that are supplied with this tool can be used with the press tool. A bit of expense required up front, but once you have the two tools, you're set!

      • Was this a gift?:
      • No
       
      5.0

      Great Tool!

      By hockeynut91

      from Montreal, Qc

      Verified Reviewer

      Pros

      • Inexpensive
      • Works Great

      Cons

        Best Uses

        • Bottom brackets

        Comments about Park Tool BBT-90.3:

        The best tools are the ones that you never think about. if you have ever tried to remove a pressed bearing with a socket or screw driver then you know how hard it is. this tool makes it a breeze!

         
        5.0

        Park Tool BB tool

        By Grumpy

        from South Africa

        Verified Buyer

        Comments about Park Tool BBT-90.3:

        This is the kind of tool I like. Cheap, simple and adaptable. I just used the press cups on a large sized bolt and voila, a BB press! Works perfectly.

        Displaying reviews 1-8

        Back to top

        Jenson USA ships worldwide, including APO/FPO addresses. For a quote, simply add the items you are interested in to your shopping cart and look for the "Shipping Options" box. You don't have to login or create an account to see shipping charges.

        Some manufacturers restrict where we can ship their products. If this item has shipping restrictions, they are listed below. If you'd like to buy an item that we cannot ship to your preferred address, we can accept your foreign credit card and ship to a USA address for you.

        Get free shipping with your $50 purchase today when you choose Standard Shipping at checkout. Please note this offer is only available to physical shipping addresses in the 48 continental United States (no PO Boxes), and oversize charges still apply on some heavy/large items

         

        Free Shipping Offer

        Get free Standard Shipping with your $50 purchase today! Just choose Standard Shipping during checkout.

        Please note this offer is only available to physical shipping addresses in the 48 continental United States (no PO Boxes), and oversize charges still apply on some heavy/large items.