Heat treated alloy tool steel, one inch base fits wrench or bench vise. Thin wall construction allows use without removal of cones and locknuts. The FR-7 Freewheel Remover is specifically designed for Falcon® brand freewheels.
Made to fit the splined pattern of the Falcon® Freewheel
Good tool. Received pack all covered in tape to hold the plastic containing the tool onto the card. Looks like someone returned this. Would be nice to be told if you'll be sent stuff with irregular packaging and/or returns. But, the tool looked fine and it worked on a *VERY* stubborn old freewheel (Falcon Superwide 6sp) with only minor damage. To be fair, this was due to me hoping in the first instance to remove it with an adjustable wrench. Even after soaking the freewheel in WD-40, the big wrench started to distort the flats of two sides of the FR-7, so time to dig out a 1" socket and 24" breaker bar. Sat on floor with one boot on, braced wheel against a wall (tire on), held it with both hands and one foot. Pushed the breaker bar with my booted foot as hard as I could and on the third try with a little grunting, the threads popped loose with a load snap. No damage to tool, wheel or bar, so this thing can take some serious strain if you seat it properly and use a socket on it. Decent price. Checked and it fits the replacement Falcon 7sp freewheel too. I'd give it 4.5stars as it could be made of even harder stuff, but it's hard enough to do even a tough job with no probs, so I'll round up this time.
Start typing your question and we'll check if it was already asked and answered. Learn More
Do not include HTML, links, references to other stores, pricing or contact info.
My question is about:
If your question is about more than one item, click + to add them.
No questions have been asked about this item. Be the first!
Questions For Similar Products
Jenson USA ships worldwide, including APO/FPO addresses. For a quote, simply add the items you are interested in to your shopping cart and look for the "Shipping Options" box. You don't have to login or create an account to see shipping charges.
Some manufacturers restrict where we can ship their products. If this item has shipping restrictions, they are listed below. If you'd like to buy an item that we cannot ship to your preferred address, we can accept your foreign credit card and ship to a USA address for you.
Get free 1-day California shipping with your $50 purchase today, on most orders. Please note this offer is only available to physical shipping addresses in California(no PO Boxes), and oversize charges still apply on some heavy/large items
Park Tool CC-2 Chain Checker Your shifting has
gone to crap. You've spent hours in the garage frantically adjusting your derailleurs like a mad man; and€¦ nothing. You've lost sleep. You finally do fall into slumber only to hear the ...
Park CTP-5 Replacement PinAll Park Tool chain tools
have replaceable pins that Use a 7mm or 9/32" 12 pt box end/socket.. Made from hardened alloy tool steel.FeaturesReplaces: CT-1, CT-2, CT-3, CT-3.2, CT-5, CT-7Manufacturer's Part No: CTPUPC: 763477002204, 763477002228
Park Tool MG-2 Nitrile Gloves Nitrile gloves keep
your hands free from dirt, grime, and most importantly-- harmful chemicals. The MG-2 is an improved upon version of Park Tool's MG-1 gloves. MG-2 gloves are thicker, snag resistant, and tough enough ...