Red Handlebar | Jenson USA Online Bike Shop
 
 
Keep Pedaling
(888) 880-3811

Red Handlebar

$144.49 15% off $169.99 msrp

Quickview
x

Race Face Next 35 Low Rise Handlebar

$144.49 15% off $169.99 msrp

Race Face Next 35 Low Rise Handlebar Race Face�s Next 35 Low Rise Handlebars are built with a leading edge, unidirectional carbon fiber weave that allows it to maintain an XC weight, while boasting the resilience required for gravity riding. In addition, the carbon construction optimizes flex for improved small bump compliance, yet retains its stiffness when you sit up and power up the climbs. Increasing the bar diameter to 35 allows material to be ...
View More

$19.99 60% off $50.00 msrp

Quickview
x

Niner Flat Top 670 Handlebar

$19.99 60% off $50.00 msrp

Niner Flat Top Alloy Handlebar Its from Niner, but that doesnt make it "29 specific" - the wide 670mm design is ideal for extra leverage for singlespeed riders. Cut marks on the bar make it simple to trim down if you prefer a narrower width. 31.8mm clamp diameter 9º sweep claimed 250 grams 7075 T6 aluminum construction A-OK to use with bar ends
View More

$98.00

Quickview
x

Chromag Fubars FU40 Handlebar

$98.00

Chromag Fubars FU40 Handlebar Chromag is a bicycle component manufacturer based out of Whistler, B.C., Canada — home to some of the best mountain biking trails in the world. They use these trails as a testing ground when innovating new ways to deliver top-quality products that will stand up to the rigors of aggressive trail riding. The Chromag Fubars FU40 handlebar is an all-mountain / freeride handlebar with an outstanding strength to weight ratio. Constructed ...
View More

$160.00

Quickview
x

Chromag BZA Handlebar

$160.00

CHROMAG BZA HANDLEBAR Chromag is a bicycle component manufacturer based out of Whistler, B.C., Canada � home to some of the best mountain biking trails in the world. They use these trails as a testing ground when innovating new ways to deliver top-quality products that will stand up to the rigors of aggressive trail riding. At 780mm in lentgh, the BZA is a full DH width handlebar, along with a 35mm clamp surface diameter with ...
View More

$79.90

Quickview
x

Spank Spike 800 Race 30mm Rise Handlebar

$79.90

Spank Spike 800 Race 30mm Rise Handlebar Spank Spike is a meticulously designed, stringently tested, and continually refined line of products meant for going big. Constructed of Spank�s Super-6 Aluminum, the Spike 800 Race handlebar also implements Spank�s dual XGT technology which uses 3D CNC Bending to create an incredibly precise and consistent wall thickness throughout the entire bar, something that wouldn�t be possible with traditional bending and hand-grinding processes. Through a ...
View More

$79.90

Quickview
x

Spank Spike 800 Race 5mm Rise Handlebar

$79.90

Spank Spike 800 Race 5mm Rise Handlebar Spank Spike is a meticulously designed, stringently tested, and continually refined line of products meant for going big. Constructed of Spank�s Super-6 Aluminum, the Spike 800 Race handlebar also implements Spank�s dual XGT technology which uses 3D CNC Bending to create an incredibly precise and consistent wall thickness throughout the entire bar, something that wouldn�t be possible with traditional bending and hand-grinding processes. Through a ...
View More

$199.00

Quickview
x

Niner Flat Top RDO 780 Carbon Handlebar

$199.00

The Niner Flat Top RDO handlebar features the same shape and carbon tuning for ride quality and comfort as all of Niner’s carbon components. The 780mm bar can be cut down to 720mm for ultimate customization. The 5mm rise design and 9 degree sweep produce a pleasant posture for enduro/ all mountain/ cross country riding. 780mm width with cut-down marks to 720mm Bar-end compatible +/- 5mm rise via Flat Top Design, 9� Sweep 195g (full ...
View More

$79.90

Quickview
x

Spank Spike 800 Race 15mm Rise Handlebar

$79.90

Spank Spike 800 Race 15mm Rise Handlebar Spank Spike is a meticulously designed, stringently tested, and continually refined line of products meant for going big. Constructed of Spank�s Super-6 Aluminum, the Spike 800 Race handlebar also implements Spank�s dual XGT technology which uses 3D CNC Bending to create an incredibly precise and consistent wall thickness throughout the entire bar, something that wouldn�t be possible with traditional bending and hand-grinding processes. Through a ...
View More

$199.00

Quickview
x

Niner Low Top RDO 720 Carbon Handlebar

$199.00

Niner Low Top RDO 720 Carbon Handlebar It's common for smaller riders to look past 29ers when shopping for a new mountain bike, as the longer traveling forks and large wheels pose a challenge to the overall riding position and comfort of shorter riders. Niner has gone out of their way to see the needs of riders of all sizes, especially smaller riders. With Niner�s exclusive extra small 29er frames, they�ve added the Low Top ...
View More

$67.99 15% off $79.99 msrp

Quickview
x

Race Face Atlas High Rise Handlebar

$67.99 15% off $79.99 msrp

Race Face designed the Atlas FR with the gravity rider in mind. This ultra strong bar is 785mm long, which is one of the widest bars produced by Race Face. Attach this to your FR or DH rig and get ready to rip. Intended Use: DH/ FR Dimensions: 785mm width, 8� rearward, 4� upward Rise: 1.25", 5� Weight: 340grams Bar Diameter: 31.8mm
View More

$79.90

Quickview
x

Spank Spike 800 Race 50mm Rise Handlebar

$79.90

Spank Spike 800 Race 50mm Rise Handlebar Spank Spike is a meticulously designed, stringently tested, and continually refined line of products meant for going big. Constructed of Spank�s Super-6 Aluminum, the Spike 800 Race handlebar also implements Spank�s dual XGT technology which uses 3D CNC Bending to create an incredibly precise and consistent wall thickness throughout the entire bar, something that wouldn�t be possible with traditional bending and hand-grinding processes. Through a ...
View More

$94.99

Quickview
x

Chromag Fubars OSX Handlebar

$94.99

Chromag Fubars OSX Handlebar Chromag is a bicycle component manufacturer based out of Whistler, B.C., Canada � home to some of the most renown mountain biking trails. With some of the world�s best trails in their own backyard, Chromag uses these trails as a testing ground when innovating new ways to deliver top-quality products that will stand up to the rigors of aggressive trail riding. In doing so, Chromag built the downhill-specific OSX handlebar using ...
View More

$95.00

Quickview
x

Deity CZ38 Special Handlebar

$95.00

Deity CZ38 Special Handlebar The Deity CZ38 Special is the signature handlebar 2010 Red Bull Rampage Champ and 2013 Red Bull Rampage Best Trick winner, Cameron Zink. Featuring Deity�s proprietary Gradient Butting Technology and 7075 T73 aluminum construction, the CZ38 Special is a gaping 760mm wide with 38mm rise, just what Mr. Zink ordered for Freeride and Downhill domination. The 9.5 degree bend with 4.5 degree upsweep paired with the 30 inch width is sure ...
View More

$59.99 20% off $74.99 msrp

Quickview
x

Azonic Flow 750mm 1" Rise Handlebar

$59.99 20% off $74.99 msrp

Azonic Flow 750mm 1" Rise Handlebar The Azonic Double Flow is a strong yet lightweight alloy handlebar that features a 30� width. Constructed of 7050-T6 alloy, this comfortably-wide handlebar allows for better leverage on those rough and relentless climbs. The bars are marked to cut them down if needed, or leave them at 750mm for ultimate control of your rig! Double-Butted 7050-T6 aluminum 31.8mm bar clamp diameter Anodized and sandblasted or metal flake paint Marked ...
View More

$51.99 20% off $64.99 msrp

Quickview
x

Azonic Flow 800mm 1" Rise Handlebar

$51.99 20% off $64.99 msrp

Azonic Flow 800mm 1" Rise Handlebar Displayed here is the Azonic Flow handlebar: an extra wide handlebar with a larger-than-most rise. Most handlebars with a width of 800mm or more will have a very short rise, possibly around 20-30mm, which works for a lot of people. However, this leaves those people looking for more rise with either a narrower bar or a goofy upward-rise stem. Offered in several brightly anodized colors and constructed of double-butted ...
View More

$199.00

Quickview
x

Niner Flat Top RDO 710 Carbon Handlebar

$199.00

The Niner Flat Top RDO handlebar features the same shape and carbon tuning for ride quality and comfort as all of Niner’s carbon components. The 710mm bar can be cut down to 650mm for ultimate customization. The 5mm rise design and 9 degree sweep produce a pleasant posture for enduro/ all mountain/ cross country riding. 710mm width with cut-down marks to 650mm Bar-end compatible +/- 5mm rise via Flat Top Design, 9� Sweep 156g (full ...
View More

$67.99 15% off $79.99 msrp

Quickview
x

Race Face Atlas 35 Mid Rise Handlebar

$67.99 15% off $79.99 msrp

Race Face Atlas 35 Mid Rise Handlebar Designed for brutal riding, and lookin� good in the flash of a camera, the Race Face Atlas sets the standard for All Mountain/ Downhill bars. At a whopping 800mm wide, the Atlas 35mm is one of the longest bars Race Face has ever produced, giving the rider unmatched high-speed control and confidence. With a 35mm clamp diameter at the center, material is able to be shaved off the ...
View More

$67.99 15% off $79.99 msrp

Quickview
x

Race Face Atlas Low Rise Handlebar

$67.99 15% off $79.99 msrp

Race Face Atlas Low Rise Handlebar Designed for extreme riding, and lookin’ good as the camera flash hits it, the Race Face Atlas sets the standard for freeride/ downhill bars. �At 785mm, this is one of the longest bars Race Face has ever produced. Race Face’s new ultra low and ultra wide riser geometry reduces the cockpit height. The internal taper increases the strength of the bar, so your front end won’t flex. Technical Specifications: ...
View More

$99.99 12% off $114.00 msrp

Quickview
x

Chromag Fubars Acute Handlebar

$99.99 12% off $114.00 msrp

Chromag Fubar Acute Handlebar Chromag is a bicycle component manufacturer based out of Whistler, B.C., Canada — home to some of the best mountain biking trails in the world. They use these trails as a testing ground when innovating new ways to deliver top-quality products that will stand up to the rigors of aggressive trail riding. The Chromag Fubar Acute handlebar is a lightweight handlebar that�s built for real-world cross-country riding. At a mere 275g, ...
View More

$62.99 10% off $69.99 msrp

Quickview
x

Race Face Turbine Low Rise Handlebar

$62.99 10% off $69.99 msrp

The Turbine blends comfort and performance, for the perfect trail bar. The Turbine is available in many different colors to add a little glamour to your bike. Intended Use: XC/ Trail Dimensions: 725mm, 6� upward, 9� rearward Rise: .75” Bar Diameter: 31.8mm Weight: 245grams
View More

$169.00

Quickview
x

Easton Haven Carbon Handlebar

$169.00

Easton Haven Carbon Handlebar The popular Easton Haven Carbon handle bar has become an all mountain staple. For 2015, the length grows from 711-millimeters to 740-millimeters and only gains 25 grams in weight. A short 20mm riser compliments the taller fronts ends of today�s trail bikes. In order to gain strength, stiffness, and durability while reducing bulk and weight, Easton utilizes Taperwall � technology. This allows for the tube wall to be reinforced anywhere along ...
View More

$118.99 15% off $139.99 msrp

Quickview
x

Race Face Next High Rise Handlebar

$118.99 15% off $139.99 msrp

Race Face Next High Rise Handlebar Race Face�s Next carbon fiber is built with a leading edge, unidirectional carbon weave that allows it to maintain an XC weight, while still being able to meet Race Face�s downhill strength requirements. The Next bar also features a reinforced stem anit-crush zone, adding valuable strength to the weakest part of most carbon bars. 31.8mm clamps diameter Unidirectional carbon fiber construction 3/4" rise 8 degrees rear sweep, 4 degrees ...
View More

$169.99

Quickview
x

Easton Haven 35 Carbon Handlebar

$169.99

Easton Haven 35 Carbon Handlebar Do you ride serious downhill trails? No? Do you still want to have a durable and reliable handle bar for your hard-hitting riding style? Yes? Easton introduces the Haven 35 Carbon Handle bar. It utilizes the proven 35-millineter clamp diameter of the downhill specific Havoc bar and puts it to use in a lighter weight and more accessible length. This creates a bar aimed more towards aggressive trail riders In ...
View More

$89.99 0% off $90.00 msrp

Quickview
x

Deity Blacklabel Handlebar

$89.99 0% off $90.00 msrp

The Black Label bar from Deity is forged with the integrity necessary to handle the rigors of extreme downhill racing. Redesigned via their new Gradient Butting Technology, the Black Label is 15% stronger and stiffer than its predecessor. The Black Label is also one of the lightest low/wide alloy DH bars on the market, and it's availiable in a rainbow of beautifully finished, anodized colors to bring that dialed look to your rig! 7075 T6 ...
View More

$79.99 0% off $80.00 msrp

Quickview
x

Deity DIRTY30 Handlebar

$79.99 0% off $80.00 msrp

The Dirty30 bar has been redesigned via Deity�s Gradient Butting Technology, making it 20% stronger and stiffer than its predecessor. It features a 25mm rise in order to keep the front end of the bike low while still giving maximum leverage and maneuverability. With a 76cm width, the Dirty30 makes a great addition to any all-mountain, DH, or freeride setup 7075 T6 Aluminum construction 31.8mm clamp diameter Two tone bead blasted finish Polished, anodized accents ...
View More

$127.49 15% off $149.99 msrp

Quickview
x

Race Face Next Flat Handlebar

$127.49 15% off $149.99 msrp

Race Face Next Flat Handlebar Race Face�s Next carbon fiber is built with a leading edge, unidirectional carbon weave that allows it to maintain an XC weight, while still being able to meet Race Face�s downhill strength requirements. The Next bar also features a reinforced stem anit-crush zone, adding valuable strength to the weakest part of most carbon bars. 31.8mm clamps diameter Unidirectional carbon fiber construction 1/4" rise 8 degrees rear sweep, 4 degrees up ...
View More

$77.99 0% off $78.00 msrp

Quickview
x

Deity Topsoil Handlebar

$77.99 0% off $78.00 msrp

Designed for everything from all-mountain to full-on downhill, the Top Soil bar from Deity is made from custom gradient 7075 T6 aluminum in order to make a bar that is strong enough for just about anything the trail can throw at it, while still being relatively light. The Top Soil bar also features Deity�s trademark two-tone bead blast and mirror polished, anodized finish and is a full 73.5cm wide, giving it plenty of leverage for ...
View More

$43.99 20% off $54.99 msrp

Quickview
x

Azonic Agile 780mm 1" Rise Handlebar

$43.99 20% off $54.99 msrp

Azonic Agile 780mm 1" Rise Handlebar The Azonic Agile handlebar is a wide and low double-butted downhill riser bar made to take a beating. The 30� (780mm) width provides superior control of your DH or AM bike, getting you safely and comfortably down any trail. Offered in several bright colors and constructed of 6061-T6 aluminum means this bar is a perfect match for your DH racing rig! Azonic Agile Handlebar Features Double-Butted 6061-T6 Aluminum 31.8mm ...
View More

$188.99 0% off $189.00 msrp

Quickview
x

Deity DC31 Mohawk Carbon DH Handlebar

$188.99 0% off $189.00 msrp

Deity DC31 Mohawk Carbon DH Handlebar After years of intensive research and trial, Deity has exclusively developed and designed the stunning DC31 Handlebar using unidirectional carbon with in-house Deity molds. Measuring in at 787mm wide, the DC31 Mohawk allocates Deity�s classic 9�x5� bends and sweeps to provide a handlebar that excels in Downhill, Enduro, and All Mountain riding. The stem clamping surface is textured to prevent annoying slippage, keeping you upright and in control. At ...
View More

$188.99 0% off $189.00 msrp

Quickview
x

Deity T-Mo Carbon Enduro Handlebar

$188.99 0% off $189.00 msrp

Deity T-Mo Carbon Enduro Handlebar Tracy Moseley is one of the most decorated female downhillers in the history of the sport. After years of harvesting Downhill titles, Tracy has shifted her focus and abilities to the budding enduro race scene. The T-Mo Enduro is her brand spankin new signature carbon hadlebar which has been exclusively developed and designed by Deity, using unidirectional carbon and in-house Deity molds. Measuring in at 735mm wide, the T-Mo Enduro ...
View More

$84.99

Quickview
x

Easton Haven Riser Handlebar

$84.99

Easton Haven Riser Handlebar The Easton Haven aluminum bar is plenty wide. Plenty wide and yet surprisingly light. At 265 Grams, it is a great component choice for the all mountain riders who want to roll faster and fly farther. In order to gain strength, stiffness and durability while reducing bulk and weight, Easton uses Taperwall � technology. This allows for the tube wall to be reinforced anywhere along the length of the bar with ...
View More

$300.00

Quickview
x

3T Ergoterra Cyclocross Drop Bars

$300.00

3T Ergoterra 42/45 Cyclocross Drop Bars From the Tour De France to the Ironman to European XC Championships to Track Worlds, 3T has seen the top step of the podium in the biggest races of every discipline over the last five decades. 3T prides itself on strong, safe, light, good looking cycle components that riders adore. Today, it is no different. For cycling enthusiast, Fall means one thing, Cyclocross season! Taped off courses, dirt, roots, ...
View More

Email Specials

Sign up for our weekly specials delivered via email

 

Free Shipping Offer

Get free Standard Shipping with your $50 purchase today! Just choose Standard Shipping during checkout.

Please note this offer is only available to physical shipping addresses in the 48 continental United States (no PO Boxes), and oversize charges still apply on some heavy/large items.