In the past couple years, enduro and trail bikes have begun covering ground we would have never thought possible on medium travel bikes. This more extreme terrain can put our wheels at risk, and make it more difficult to carry momentum. Flat Tire Defender is designed to protect you from pinch flats, and increase the lateral stiffness of your wheels. The airless foam inserts help absorb the shock and vibration of rough terrain, which minimizes tire and rim damage, and gives your bike a more forgiving feel. Using a high-density foam rubber polymer that is both resilient and light weight, the Enduro & Trail Kit keeps your rig feeling nimble and reliable while offering an extra layer of protection. This product is designed to be used with sufficient pressure in the tire, and the foam inserts are not a substitute for air. If air pressure is lost, your tires and rims are still vulnerable to damage; please make sure beads are properly seated and pressure is sealed before use.
Fits wide range of tire widths 2.3" to 2.6" tire width, 22mm to 28mm rim width
Recommended tire pressure 24 to 30psi
Increases pinch flat protection keeping the risk of pinch flats at bay
Minimizes tire & rim damage using a high-density foam rubber polymer
Minimizes tire sidewall roll over increasing lateral stiffness
Reduces vibration created by wheel & suspension for a smoother ride
Helps carry momentum over rough terrain keeping your rhythm going in tough sections
Improves rolling efficiencyand dampens vibration
CALIFORNIA PROPOSITION 65 WARNING: This product can expose you to chemicals including (Cadmium, Phthalates, Bisphenol, Nickel (Metallic), di(2-ethylhexyl)phthalate "DEHP"), which is known to the State of California to cause cancer and/or cause birth defects or other reproductive harm. For more information, go to www.P65Warnings.ca.gov.
Works as advertized, but don't think you'll be able to run lower than 25 psi through rock gardens. After 6 months of use, I've only pinch flatted once with this on the rear due to hitting a rock at speed with the bike leaned into a corner. Plus the rear tire was probably way over due for replacement anyway :)
This stuff is a great idea. I’m using it more as a runflat system for a gravel bike. And it works well for what it’s purposes. However, for two circles of foam? The stuff is really expensive! I won’t buy it again because of that. And just a heads up, the stems are a little bit too short.
Jenson USA ships worldwide, including APO/FPO addresses. For a quote, simply add the items you are interested in to your shopping cart and look for the "Shipping Options" box. You don't have to login or create an account to see shipping charges.
Some manufacturers restrict where we can ship their products. If this item has shipping restrictions, they are listed below. If you'd like to buy an item that we cannot ship to your preferred address, we can accept your foreign credit card and ship to a USA address for you.
Get free 1-day California shipping with your $60 purchase today, on most orders. Please note this offer is only available to physical shipping addresses in California(no PO Boxes), and oversize charges still apply on some heavy/large items
DT Swiss 15mm To 5mm QR Conversion Kit
This is the main part you need if you want to run a standard quick release in your DT Swiss thru-axle 350 or 370 hub. This conversion axle will fit your front ...
Lezyne Smart KitDo the smart thing and be
prepared for the unexpected. The Lezyne Smart Kit is an ultra-compact tire repair kit that includes six glueless patches, tire boot and stainless steel scuffer. Patches are highly pliable and coated with ...
ONEUP COMPONENTS EDC PLUG AND PLIER KITThe EDC
PLUG & PLIERS KIT is the perfect addition to the EDC tool system. The tire plug Jabber Tool threads directly into the EDC carrier. The new Quick Link Breaker Pliers are compatible ...