The SRAM DUB bottom bracket preload adjuster kit is used to adjust the bottom bracket bearing preload on SRAM DUB cranks. The kit includes one screw, the outer ring, and two inner rings. One inner ring has a flange and the other does not. The inner ring with a flange is designed for XX1 and X01 Dub cranks (except when installing on a fat bike). To adjust the preload of your cranks, rotate the outer ring until it stops from contacting the shield. Next, tighten the bolt in the outer ring to secure the cranks. This should eliminate any play the crankset has. Do not overtighten the preload adjuster or bearing damage could occur.
Jenson USA ships worldwide, including APO/FPO addresses. For a quote, simply add the items you are interested in to your shopping cart and look for the "Shipping Options" box. You don't have to login or create an account to see shipping charges.
Some manufacturers restrict where we can ship their products. If this item has shipping restrictions, they are listed below. If you'd like to buy an item that we cannot ship to your preferred address, we can accept your foreign credit card and ship to a USA address for you.
Get free 1-day California shipping with your $50 purchase today, on most orders. Please note this offer is only available to physical shipping addresses in California(no PO Boxes), and oversize charges still apply on some heavy/large itemsDue to manufacturer restrictions, this product cannot be shipped to the following locations: