Featured Brands
Recommended Products
SAVE20
Get free shipping, on most items, with your $50 purchase today! Same day shipping on most orders if placed by 3pm PST.
PLEASE NOTE:
This offer is only available to physical shipping addresses in the 48 continental United States (no PO Boxes), and some exclusions apply.
Oversize Charges
Some large and/or heavy items are subject to additional oversize charges that are separate from standard shipping costs.
Bike Build Process
All bikes are built, tested, tuned, and ready to ride upon shipment. The bike build process typically takes 2-3 days to complete depending on the bike model and the complexity of the build.
Stock Status
Orders for in-stock items placed by 3PM PST usually ship on the same day. Orders that include special-order or backordered items may be subject to shipping delays depending on product availability. Refer to estimated delivery times in cart when selecting shipping options.
Our Gear Advisors are Ready to Help.
Among the most important components on your bike, front and rear derailleurs and their associated parts are what allow you to change gears while cruising down the road or trail. When working properly, your derailleurs become a seamless extension of your hands, quietly and quickly moving the chain up or down your chainrings or cassette cogs. But when not adjusted properly (or if they get damaged) derailleurs can become a source of nagging frustration, causing excessive noise, miss-shifts, and even dropped or jammed chains.
Modern derailleurs typically have a chain guide that is controlled by either cables or small electronic motors, which are connected via cables, wires, or wireless technology, to a shifter that is manipulated by rider input. When the rider engages the shifter, that chain guide moves up or down, “derailing” the chain onto a different cassette cog or chainring.
Most modern mountain bikes no longer come spec’d with a front derailleur, and instead rely on a single chainring and wide range cassette to provide adequate gearing. But most drop bar bikes (road, gravel, and cyclocross) typically still utilize a front derailleur, though 1x set-ups are starting to crop up more and more here, too.
Most rear derailleurs share the same basic design, with two pivots (upper and lower) plus a cage and two pulleys for the chain to run through. The rear derailleur is bolted to the frame via a derailleur hanger, while front derailleurs are attached via a clamp or direct-mount interface. Shifters either pull a cable that moves the derailleur, or in the case of electronic drivetrains, communicate with the derailleur electronically via wires or wireless technology.
The rear derailleur actually has two jobs, moving the chain up and down the cassette and also taking up the chain slack, which is most pronounced when the chain is in a small cog in the rear or small chainring in the front. Critical parts of the rear derailleur include b-tension adjuster, guide pulleys, p-knuckle, and high and low limit screws, which when adjusted properly keep the chain from being shifted into the wheel or frame.
Simpler in design and function, the front derailleur moves your chain side to side between your chainrings. As with the rear derailleur, it has a cage in which the chain passes through. When adjusted correctly, the chain only touches either side of that cage during the process of shifting. Also like in the rear, the front derailleur has a pair of limit screws that keep your chain from being thrown either inside or outside the chainrings.
Both these critical components are most commonly constructed from aluminum, though, carbon fiber, titanium, and steel may also be used. Choosing the right front and rear derailleurs involves numerous considerations, including drivetrain compatibility and gear range, which may require a long or short cage rear derailleur. If you have any questions about derailleurs, don’t hesitate to call a JensonUSA.com Gear Advisor today at 888-880-3811, who will happily guide you through the selection process.