The legendary Thomson Elite, in a downsized clamp version for road use. With two bolts instead of four, it shaves grams but still provides similar stiffness to the MTB Elite stem.
100% Made in the USA
Smooth-edged clamp for compatibility with carbon bars
149 grams (110mm long)
Machined from 7000-series aluminum
Made in USA
CALIFORNIA PROPOSITION 65 WARNING: This product can expose you to chemicals including (Cadmium, Phthalates, Bisphenol, Nickel (Metallic), di(2-ethylhexyl)phthalate "DEHP"), which is known to the State of California to cause cancer and/or cause birth defects or other reproductive harm. For more information, go to www.P65Warnings.ca.gov.
I originally went with a Thomson 4x MTB stem when i built up a new carbon road frameset because I have them on other bikes and they are bullet proof. Thomson is made in the USA and exceptional quality, but I wasn't sure if the two bolt design would be secure enough, especially with carbon bars. When I needed to move the 4x to another bike I thought i'd give this one a try. Bottom line, this stem is way stronger than other stems I've tried and lighter than many others. I'm glad I went with this stem and you will too.
I have the 120mm -10 degree. Replaced a Ritchey WCS stem with this one on my CAAD9 and instantly noticed a stiffer front end. I used to think the C'dale full carbon forks were flexy, but realized it was the stem all along. I am a climbing specialist (6' tall, 154lbs). I will be purchasing more of these stems for my 'cross and carbon road bikes. The 'heavy' 149 grams is well worth it. It's a piece of art. Buy Thomson seatposts too
This is it, the legendary Thomson X2. Pretty dang stiff, and not the lightest, but Thomson advertisements have shown these with CARS hanging off of them with no ill effects, I think it'll hold up to bicycle use. Combined with stiff bars and a stiff headtube, you'll have a rock solid steering foundation. It's money well spent.
These have a short little stack height, so you may need an additional spacer when you install it.
As with any bicycle component, install according to manufacturers' recommendations and don't overtorque the bolts.
The X2 is a road stem, if you want a Mountain stem in more "mountain" sizes go for the X4. The X4 is also purportedly stiffer. For those interested, These don't actually start looking "long" until 120mm and above, due to the bulbous ends.
Also, if you have one of these, you better have the matching Thomson seatpost! That's just the way it works.
PROS: Variety of sizes, Stiff, Top of the Line, Holds Resale Value, Standard, BEAUTIFUL
the stem looks very slick and really locks down on the fork and bars. I think if you were buying a 90 or 80mm stem you wouldn't have any problems at all. I wouldn't recommend this at the longer length for riders who like pulling the bars during climbs.
Jenson USA ships worldwide, including APO/FPO addresses. For a quote, simply add the items you are interested in to your shopping cart and look for the "Shipping Options" box. You don't have to login or create an account to see shipping charges.
Some manufacturers restrict where we can ship their products. If this item has shipping restrictions, they are listed below. If you'd like to buy an item that we cannot ship to your preferred address, we can accept your foreign credit card and ship to a USA address for you.
Get free 1-day California shipping with your $50 purchase today, on most orders. Please note this offer is only available to physical shipping addresses in California(no PO Boxes), and oversize charges still apply on some heavy/large items
Industry Nine A318 Mountain StemCreating better parts is
Industry Nine’s ObsessionIndustry Nine is renowned for producing products that are both visually stunning and high performing. The company’s new A318 stem is no exception to their legacy. The A318 takes its ...
JOYSTICK BINARY STEMStems are an important part when
it comes to riding comfort. The Joystick Binary Stem is designed for all-mountain, enduro, gravity, and slopestyle riders. It is lightweight and durable and made from CNC-machined aluminum. It features an incredibly ...
2013 Race Face Evolve Stem Race Face builds
the Evolve Stem from forged and blasted 6061 aluminum to keep it strong and durable at a reasonable weight. The faceplate eliminates "stress risers" wich could damage your bars and lead to ...