Home 30 Mm Spindle Bottom Bracket

30 Mm Spindle Bottom Bracket

x

Easton Press Fit 30 Bottom Bracket PF 30 for 30mm Spindle

$42.99 28% off $60.00 msrp

Easton Press Fit 30 Bottom Bracket The Easton Press Fit 30 Bottom Bracket was made to work with their new Cinch interface system. The Cinch system uses a 30mm spindle to provide a stiffer bottom bracket/crankset interface. If you've got one of the new Easton EC90 SL cranks and a PF30 frame, this is what you need! Specs Standard 6806 retainer bearings Bearings are external to the BB shell resulting in a stiffer wider stance ...

x

Hope 68/73mm 30mm Bottom Bracket Red, 30mm Spindle, 68/73mm Threaded

$108.00 10% off $120.00 msrp

Hope 68/73mm 30mm Bottom Bracket Keep your 30mm crankset turning over smooth and fast by upgrading to the Hope 68/73mm 30mm Bottom Bracket. The machined aluminum cups hold stainless steel cartridge bearings inside stainless steel races, providing a much greater life span than stock units. The Hope 30mm bottom bracket allows the use of any 30mm crankset within a BSA threaded BB shell of 68mm, 73mm or 83mm, meaning it can be used on select ...

x

Race Face BSA 30mm Bottom Bracket 68/73mm, 30mm Spindle

$59.99

RACE FACE BSA 30MM BOTTOM BRACKETThe bottom bracket is the part that goes through your frame that your crankset is attached to. These bearings are essential to every bike, so make sure you don't get something that is inferior quality. The Race Face BSA 30mm Bottom Bracket is designed with improved seals for extended life. They are designed for use with 2014 and newer Race Face cranks with 30mm spindles.FeaturesImproved seals for extended lifeDesigned for ...

x

Race Face BB92 30mm Bottom Bracket 2018 BB92, 30mm Spindle

$50.99 15% off $60.00 msrp

Race Face BB92 30mm Bottom Bracket The Race Face BB92 30mm Bottom Bracket allow the use of Race Face cranks with CINCH technology to be used on bikes designed with BB92 press fit bottom bracket shells. Features: Custom 19 ball flanged retainer bearings Allow the use of a 30mm spindle with Shimano press fit shells without decreasing ball bearing size Bearings races are fully coated for improved corrosion resistance Bearings are factory filled with Phil ...

x

Race Face PF30 30mm Bottom Bracket 2018 PF30, 100mm, 30mm Spindle

$49.99 16% off $60.00 msrp

Race Face PF30 30mm Bottom Bracket The Race Face PF30 30mm Bottom Bracket was made to work with their new Cinch interface system. The Cinch system uses a 30mm spindle to provide a stiffer bottom bracket/crankset interface. If you've got one of the new Race Face Next SL cranks and a PF30 frame, this is what you need! Standard 6806 retainer bearings Bearings are external to the BB shell resulting in a stiffer wider stance ...

x

Race Face PF30 Bottom Bracket 30mm Spindle, 100mm

$59.99

RACE FACE PF30 BOTTOM BRACKETThe bottom bracket is the part that goes through your frame that your crankset is attached to. These bearings are essential to every bike, so make sure you don't get something that is inferior quality. The Race Face PF30 Bottom Bracket is designed with improved seals for extended life. They are designed for use with 2014 and newer Race Face cranks with 30mm spindles.FeaturesImproved seals for extended lifeDesigned for 2014 and ...

x

Easton Press Fit 86.5 Bottom Bracket PF 86.5 for 30mm Spindle

$42.99 28% off $60.00 msrp

Easton Press Fit 86.5 Bottom Bracket The Easton PF86.5 Bottom Bracket was made to work with their new Cinch interface system. The Cinch system uses a 30mm spindle to provide a stiffer bottom bracket/crankset interface. If you've got one of the new Easton EC90 SL cranks and a PF30 frame, this is what you need! Specs Standard 6806 retainer bearings Bearings are external to the BB shell resulting in a stiffer wider stance Bearings are ...