Home Black End Caps

Black End Caps

x

DT Swiss | 350/370 End Cap Kit | Black | 15X100, Front

$43.50

DT Swiss 350/370 End CapsBUSTIN' A CAPBicycle standards change rapidly. Luckily, there are adapters so you can change your equipment up to work with these other standards. The DT Swiss 350/370 End Caps replace your DT Swiss 350 or 370 end caps with ease. These caps are precision machined and provide smooth, fast rolling rotation. They’re compatible with DT Swiss 350, 370, R23, R24, and 1900 Spline front hubs so you can use 15x100mm thru-axles. ...

x

Reynolds | Disc Hub QR End Caps | Black | 12, Front-100X12 Quick Release

$27.00 10% off $30.00 msrp

Reynolds Disc Hub QR End CapsConvert your 2015-16 Reynolds wheels to support quick release skewers with the Reynolds Disc Hub QR End Caps. The end caps are only compatible with straight-pull, center-lock on the following wheels: 46 Aero Disc ATR Attack Disc Assault Disc 2015. FeaturesFront: 100x20 to Quick releaseRear: 142x12Fornt and rear sold separatelyWheel compatability46 Aero DiscATRAttack DiscAssault Disc2015 Stratus Pro Disc | Reynolds | Disc Hub QR End Caps | Black | 12, ...

x

DT Swiss | 142/148X12mm ThroughAxle End Caps 11SPD: Fits Straight Pull 240 & 350

$43.50

DT SWISS 142/148X12MM THRU AXLE END CAPSThe DT Swiss 142/148x12mm Thru Axle End Caps is a rear axle conversion kit that converts your hub to fit a new axle measurement or for a new groupset. These end caps are specific to 11-speed road freehub bodies/cassettes and are not compatible with 9/10-speed mountain hubs. The end caps work with all straight-pull, 11-speed road DT rear hubs and wheels. It is not SCS compatible and the end ...

x

DT Swiss | XD End Caps 142mm X 12mm, Fits 240, 350 and 440 Hubs

$43.50

DT Swiss XD End CapsReplace your DT Swiss 180, 240, 350, or 440 rear hub end caps with ease. These caps are precision machined and provide smooth, fast rolling rotation. They’re compatible with DT Swiss 180, 240, 350, and 440 rear hubs size 12x142mm. FeaturesCompatibility DT Swiss 180, 240, 350, and 440 HubsSize 12x142mm | DT Swiss | XD End Caps 142mm X 12mm, Fits 240, 350 and 440 Hubs

x

SRAM | Rise 40 Front QR Axle End Caps | Black | for Rockshox Forks

$18.99 5% off $20.00 msrp

SRAM Rise 40 front wheel Rockshox end caps will fit onto your SRAM Rise 40 wheels. Sold as a set | SRAM | Rise 40 Front QR Axle End Caps | Black | for Rockshox Forks

x

DT Swiss | XD End Caps for 135mm Hubs 135Mmx12mm: Fits 240, 350, 440

$43.50

DT SWISS XD END CAPS FOR 135MM HUBSCOMING TO AN ENDThere are many situations where you would want end caps for your wheels. Often times, riders will have multiple bikes but will have one pair of wheels that have the potential to fit both frames. All that is need is a pair of end caps so the wheels will fit properly. The DT Swiss XD End Caps For 135mm Hubs is designed to work with ...

x

DT Swiss | 350 110X20 Left End Cap | Black | Left

$21.80

DT SWISS 350 110X20 LEFT END CAPON YOUR LEFTThe DT Swiss 350 110x20 Left End Cap is compatible with the DT Swiss 350 20x110mm front hubs. It is designed for the left end only. FeaturesDesigned for the DT Swiss 350 front hubFor the left only | DT Swiss | 350 110X20 Left End Cap | Black | Left

x

Industry Nine | Hydra Hub End Caps Front, Center Lock 15mm Kit

$40.00

Industry Nine Hydra Hub End CapsInterchangeable end caps have changed the game. No longer do you have to buy a new wheelset because your new frame or fork has a different axle standard. You are currently looking at interchangeable end caps for Industry Nine's Hydra front and rear hubs. FeaturesEnd Cap Options: Front 15mm kit Front 15mm Torque Cap kit Rear QR Kit Rear 12x135/150mm Kit Rear 12x142/148/157/177/197mm Kit Rear 12x142mm MicroSpline Kit Front, Center ...

x

DT Swiss | 135X12 or 150X12 End Caps For DT Swiss | 2011+ 240, 350, 440 Hubs

$43.50

DT Swiss 135X12 Or 150X12 End Caps Keep those DT Swiss wheels rolling and in service with a set of endcaps. These will let your standard 135mm QR fit either a 12x135mm frame or a 12x150mm frame. Compatible with 2011 and later 240, 350, and 440 hubs. FEATURES End cap kit converts 2011+ 240, 350 and 440 hubs from QR to a 135mm x 12mm thru axle Also converts 150mm spaced QR rear hubs to ...

x

Easton | X5 Rear End Caps 12 X 142mm/148mm, Pair, Easton | # 8022450

$16.00

Easton X5 Rear End Caps Use these genuine Easton end caps to adapt your Easton X5 rear hub to fit your bike frame. This set includes the pair of endcaps to adapt the X5 hub to fit frames with 12x142mm thru-axlehub spacing. Features Fits X5 rear hubs Sold in pairs (right and left side) Adapts to fit 12x142mm thru axle frames Easton Part #8022450 | Easton | X5 Rear End Caps 12 X 142mm/148mm, Pair, ...

x

Stan's No Tubes | 3.30HD Front End Caps 20mm

$20.00

Effortlessly convert your Stan's 3. 30HD front hub to accept 20mm through axle or a 9mm through axle. Simply remove your old caps with a axle vise and pop in the new caps. | Stan's No Tubes | 3. 30HD Front End Caps 20mm

x

Jagwire | End Caps | Black | 4.0mm, 50/Bottle, Open Brass

$69.99

Jagwire End CapsUpgrade your cable housings with Jagwire End Caps. Available in either open or sealed, these end caps provide quality, low-friction performance. The open-end caps deliver performance and are good for cables at the levers and others places that don get much trail debris. The sealed end caps have an internal rubber O-ring to help keep the housing clean from debris and come in a 4. 5mm aluminum alloy construction. FeaturesAluminum alloy or brass ...

x

Race Face | Turbine End Cap Rear, 12X142 ThroughAxle

$22.99

Race Face Turbine / AeffectEnd CapsUse the Race Face Turbine End Caps for adapting Turbine hubsto be compatible with your particular frame and fork. Also compatible with Aeffect wheelsets. Model: Turbine / AeffectNot compatible with Vault HubsFront Hub Endcaps: 9mm QRRear Adapters: 10x135mm thru-bolt, 9x135mm Quick Release, 12x142mm thru axleUPC: 821973210384Please note: Conversion of rear endcaps requires a large 12mm Allen hexkey and 17mm open end or conewrench. Removal of end caps may ...

x

Stan's No Tubes | Neo 12mm Endcaps Rear, 12X142/148/157, Adapters Only

$23.00

Stan's NoTubes Neo 12mm endcapsRear 12mm through axle end caps for 142/148/157mm Neo Centerlock and Neo Ultimate Centerlock rear hubs. Not compatible with 6-bolt hubs. | Stan's No Tubes | Neo 12mm Endcaps Rear, 12X142/148/157, Adapters Only

x

DT Swiss | 240 Front Adapter Front End Cap for Disc Hubs

$30.70

DT Swiss 240 Front AdapterSometimes riders want to use one set of wheels on both their mountain bike and cruiser bike but can't because they use two different axle styles. Luckily, for some wheels, you can change the end caps out so you can use the wheels with different forks. End caps for front DT-Swiss 240 disc hub. These caps are precision machined and provide smooth, fast rolling rotation. FeaturesCompatibility:DT-Swiss 240 hub disc front | ...

x

ENVE | ID360 Hub Endcap Rear Drive XDR end cap 12mm (also for Campy)

$15.00

ENVE ID360 HUB ENDCAPNO CAPThere are many different hub standards out there. Luckily, there are adapters so you can easily use a hub with your bike. The ENVE ID360 Hub Endcap is designed to convert an ENVE hub so it will work with your bike. Whether you need a quick-release rear hub or you use 12mm thru-axles and SRAM XDR cassettes, ENVE has you covered. FeaturesDesigned for ENVE rear hubsConverts your hub so it will ...

x

Jagwire | 4mm Lined End Cap | Black | 4mm, Bottle 50

$64.99

Jagwire lined End CapsUpgrade your cable housings with Jagwire Lined End Caps. Available in either 4 or 4. 5 mm, these end caps provide quality, low-friction performance. The Lined End Caps are perfect for those who want to protect and preserve their cable coating from dirt and trail debris due to its internal sleeve that extends out from the end. FeaturesInternal sleeve protects the inner cableAluminum alloy 4mm or 4. 5 mm Bottle of 50 ...

x

Jagwire | End Cap Pack for 2x Elite Link Shift Kits | Black | for 2x Elite Link Shift Kit only

$19.99

Jagwire End Cap Pack for 2x Elite Link Shift KitsThe Jagwire End Cap Pack for 2x Elite Link Shift Kits contains each of the specialty end caps found in the corresponding Elite Link DIY Kit. It is suitable for bikes that requires extra end caps for unique installations, or to replace lost or damaged end caps. The Jagwire End Cap Pack for 2x Elite Link Shift Kits ensures you have more than enough spare 2x ...

x

Jagwire | Anti-Kink End Cap | Black | 4mm, Shifter, Bag of 30

$60.99

JAGWIRE ANTI-KINK END CAPNOT FOR THE KINKYCable kink can be a very annoying thing. It can reduce your bike's performance and it also just looks bad. The Jagwire Anti-Kink End Caps are made with a flexible tip to eliminate kinks or cracks in the housing where there are tight bends or repeated motion. These are perfect for use with folding bikes, suspension lockouts, dropper seatposts, and handcycles. You can use Anti-Kink End Caps on any ...

x

Jagwire | Nylon Derailleur Housing Endcaps | Black | 4mm, Bottle/100

$29.99

JAGWIRE NYLON DERAILLEUR HOUSING ENDCAPSWhen you're replacing your housing on your bike, you want to make sure you put end caps on the ends of the housing to ensure your cables perform optimally. The Jagwire Nylon Derailleur Housing Endcaps are designed specifically for 4mm derailleur housing. They come in a bottle of 100, so you'll have enough endcaps for shop use, or to last you a lifetime. FeaturesDesigned specifically for 4mm derailleur housingComes in a ...

x

DT Swiss | 240 12X142mm Conversion Kit 12X142mm, 2010+, # Hwgxxx0002193C

$43.50

DT Swiss 240 12x142mm Conversion Kit In addition to the craftsmanship and state of the art technology in which DT Swiss wheels and hubs are famous for, they can be converted into various axle-standards. Convert your DT Swiss wheel or hub into a 12 mm thru axle with the 240 12X142MM Conversion Kit. If you have any questions, please call or chat with our friendly customer service representatives. Coverts to a 12x142mm thru axle Includes ...

x

Jagwire | Hooded End Cap | Gold | 5mm, Bottle of 30

$59.99 20% off $75.50 msrp

Jagwire Hooded End CapEnd caps, as small as they may be, play a huge role in a smooth and clean shifting drive train and braking system. These Jagwire hooded End Caps provide additional protection from dirt grime and muck. They are available in 4mm, 4. 5mm, and 5mm sizes to work with all brake and shifting lines. Select the size you need from the dropdown menu above. FeaturesSold in a bottles of 30Available for 4mm, ...

x

MRP | SUS BETTER BOOST HOPE PRO 2 AND PRO 4 HUBS Boost Endcap Kit

$49.95

MRP Better Boost Hope Pro 2 And Pro 4 HubsUpgrade Your BikeBoost spacing is a great way to improve your performance. If you want to upgrade your fork to a Boost fork, but still have a non-Boost hub, you can easily add an adapter. The MRP Better Boost Endcap Kit allows you to upgrade your existing 15x100mm front wheel to the Boost 15x110mm fork standard. This kit maintains the existing dish of the wheel by ...