Home Black Internal Headset

Black Internal Headset

x

FSA | Impact Pro Internal Headset | Black | Internal, Campagnolo

$29.99

FSA Impact Pro Internal Headset Full Speed Ahead with the FSA Impact Pro Internal Headset. For use in BMX frames and compatible with most detangler and gyro devices, the Impact pro is ready to hit the streets. Fully serviceable and sealed cartridge angular contact bearings keep the bars spinning and the turns burnin'. Features : Campagnolo compatible Gyro Compatible Bearing Type: Cartridge Alloy top cover Patented alignment tip for increased durability and performance 7075 alloy ...

x

FSA | Orbit Z 1 Internal Headset | Black | 1 1/8", 44.0 mm OD

$41.99 40% off $69.99 msrp

FSA Orbit Z 1 Internal HeadsetIntroducing the FSA Orbit Z 1 Internal Headset, a lightweight headset with premium internals. The Orbit Z 1 Internal Headset is made of lightweight aluminum and weighs in at just 85 grams. The headset features 44mm OD cups with angular contact bearings, a 1 1/8” threadless steerer tube and a 14mm stack height. The crown race is made of 7075 aluminum alloy and is 30mm. Features1 1/8" size steerer tube ...

x

FSA | Orbit ZS-3 Internal Headset Blk, 11/8", 44.0 OD, Zero Stack

$59.99 14% off $69.99 msrp

The FSA Orbit ZS-3 headset is compatible with Cane Creek style internal headsets and features a shallow cup. Features and Information Cane Creek Compatible Shallow Alloy cups fit into 50mm OD headtube Very low profile designed primarily for ATBs Patented alignment tip for increased durability and performance TH brand 36/45 degree Micro Angular Contact Bearings (blue seal) 7075 alloy crown race Laser etched aluminum top cap 1 1/8" size steerer tube Stack Height - 9. ...

x

Wolf Tooth Components | Performance ZS56/40 Lower Headset Black

$34.95

WOLF TOOTH PERFORMANCE ZS56/40 LOWER HEADSETA SUPERIOR HEADSETMany riders don't pay much attention to their headsets. With a higher-end headset, you'll have smoother bearings for unparalleled steering. The Wolf Tooth Performance ZS56/40 Lower Headset is designed for frames with internal bearing cups that are pressed into the frame. It is made out of 6061 aluminum and comes with Enduro black oxide bearings. The lower assembly has a custom-molded dual-lip seal on the crown race that ...

x

Chris King | InSet i7 Headset Black

$170.00

Chris King I7 Inset HeadsetChris King designed the first sealed bearing headset in 1976. Thirty-four years later, the King headset remains a benchmark for quality. No other bicycle component can claim the precision, performance and absolute reliability of a Chris King headset. At Chris King Precision Components, they manufacture each headset in their own facility to exacting standards, using quality-at-the-source methods to minimize waste. Even the sealed, cartridge style bearings are made ...

x

Cane Creek | 40 Is52/40 Lower Headset | Black | Is52/40, 1.5", Threadless

$30.50

Bottom assembly for Cane Creek 40 headsets. Fits 1. 5" threadless steer tubes Bottom assemblies include sealed black oxide bearing and crown race Consistent stack heights across 10, 40 and 110 Series Internal parts are cross-compatible across 10, 40 and 110 series Durable steel crown race with low-friction face-seals IS52 39. 7mm crown race Weight: 50 grams | Cane Creek | 40 Is52/40 Lower Headset | Black | Is52/40, 1. 5", Threadless

x

FSA | Orbit Z 1.5R ZS Reducing Headset | Black | 1.5 to 1 1/8"

$80.00

FSA Orbit Z 1. 5R ZS Reducing Headset The FSA Orbit Z 1. 5R ZS Reducing Headset features a very low-profile design primarily for mountain bikes and is compatible with Cane Creek internal style headsets (Zero-Stack). In other words, 1. 5" to 1-1/8". The company's patented alignment tip affords an increased durability and performance, while the 7075 alloy crown race keeps the weight of this component low. TH brand 36 degree Micro Angular Contact Bearings ...

x

Wolf Tooth Components | Performance ZS44/28.6 Upper Headset Red

$44.95

WOLF TOOTH PERFORMANCE ZS44/28. 6 UPPER HEADSETA SUPERIOR HEADSETMany riders don't pay much attention to their headsets. With a higher-end headset, you'll have smoother bearings for unparalleled steering. The Wolf Tooth Performance ZS44/28. 6 Upper Headset is designed for frames with internal bearing cups that are pressed into the frame. It is made out of 6061 aluminum and comes with Enduro black oxide bearings. It ships with a star nut which can only be used ...

x

Cane Creek | 10 ZS56/40 Lower Headset 10 ZS56/40 Bottom Headset

$22.44 12% off $25.50 msrp

Cane Creek 10 ZS56/40 Bottom Headset Get the look and feel of the higher end headset with the Cane Creek 10-series. They may have simpler machining and use more economical materials but they are just as functional and reliable as their big brothers. They are purposely designed with the future upgrade in mind. They share the internal geometry of Cane Creek's higher-end headsets and, as a result, replacement and upgrade parts are readily available. Features ...

x

Wolf Tooth Components | Performance IS41/28.6 Upper Headset Purple

$39.95

WOLF TOOTH PERFORMANCE IS41/28. 6 UPPER HEADSETA SUPERIOR HEADSETMany riders don't pay much attention to their headsets. With a higher-end headset, you'll have smoother bearings for unparalleled steering. The Wolf Tooth Performance IS41/28. 6 Upper Headset is designed for frames with molded-in internal bearing cups. It comes with Enduro black oxide steel sealed bearings and the upper headset ships with a star nut that can be used on forks with aluminum or steel steerer tubes. ...

x

Cane Creek | Hellbender 70 ZS Headset ZS44/28.6/H8 | ZS56/40/H4 (Baa1186K)

$95.00

Cane Creek Hellbender 70 ZS HeadsetCane Creek created the Hellbender 70 headset to bridge the gap between their workhorse 40-series range of headsets and their premium 110-series range of headsets. It features all the design characteristics, scaling elements, and the same Hellbender bearing found in the 110-sereis at a price closer to the 40 series. FeaturesCups: 6061 T-6 Aluminum, Internally contoured and relieved to minimize weight and maximize strengthCovers: Low-friction upper bearing ...

x

Chris King | InSet 5 Headset Matte Slate

$170.00

CHRIS KING INSET 5 HEADSETChris King designed the first sealed bearing headset in 1976. Thirty-four years later, the King headset remains a benchmark for quality. No other bicycle component can claim the precision, performance and absolute reliability of a Chris King headset. At Chris King Precision Components, they manufacture each headset in their own facility to exacting standards, using quality-at-the-source methods to minimize waste. Even the sealed, cartridge style bearings are made ...

x

Cane Creek | Hellbender 70 ZS/EC Headset ZS44/28.6/H8 | EC44/40/H12 (Baa1187K)

$95.00

Cane Creek Hellbender 70 Zs/Ec HeadsetCane Creek created the Hellbender 70 headset to bridge the gap between their workhorse 40-series range of headsets and their premium 110-series range of headsets. It features all the design characteristics, scaling elements, and the same Hellbender bearing found in the 110-sereis at a price closer to the 40 series. FeaturesCups: 6061 T-6 Aluminum, Internally contoured and relieved to minimize weight and maximize strengthCovers: Low-friction upper ...

x

Cane Creek | Hellbender 70 Is Headset Is41/28.6/H9 | Is52/40/H1 (Baa1188K)

$80.00

Cane Creek Hellbender 70 Is HeadsetCane Creek created the Hellbender 70 headset to bridge the gap between their workhorse 40-series range of headsets and their premium 110-series range of headsets. It features all the design characteristics, scaling elements, and the same Hellbender bearing found in the 110-sereis at a price closer to the 40 series. FeaturesCups: 6061 T-6 Aluminum, Internally contoured and relieved to minimize weight and maximize strengthCovers: Low-friction upper bearing ...

x

Cane Creek | 40 Is52/30 Lower Headset Is52/30mm

$30.50

Cane Creek 40 Series Is Bottom Headset IS52/30 Conversion Bottom fits 1-1/8" straight steerer tubes to tapered 52mm 1. 5" IS bottom head-tubes. Features Consistent stack heights across 10, 40 and 110 Series Internal parts are cross-compatible across 10, 40 and 110 series Durable steel crown race with low-friction face-seals IS52/30 Conversion Bottom fits 1-1/8" straight steerer tubes to tapered 52mm 1. 5" IS bottom head-tubes Integrated (IS) assemblies feature chamfers molded inside the ...