Home Black Spindle

Black Spindle

x

Hope Technology | 68/73Mm 30Mm Bottom Bracket | Black | 30Mm Spindle, 68/73Mm Threaded

$111.99 13% off $130.00 msrp

Hope 68/73mm 30mm Bottom Bracket Keep your 30mm crankset turning over smooth and fast by upgrading to the Hope 68/73mm 30mm Bottom Bracket. The machined aluminum cups hold stainless steel cartridge bearings inside stainless steel races, providing a much greater life span than stock units. The Hope 30mm bottom bracket allows the use of any 30mm crankset within a BSA threaded BB shell of 68mm, 73mm or 83mm, meaning it can be used on select ...

x

Race Face | Turbine Alloy Cinch Crankarms 175Mm 143Mm Spindle | Aluminum

$179.99

Race Face Turbine Crankset The one crank to rule them all The Race Face Turbine Crankset has become a trusted crankset for cross country, trail, and even all-mountain riders around the world—and the newly-updated Turbine features a reduced weight, decreased Q-factor, and an increase in overall shredability, with updated modern styling that really stands out on the trails. This new version loses 20 grams over the previous model, . The Turbine balances exceptional strength for ...

x

Race Face | Era E-Bike Carbon Cinch Crankarms 175Mm Bg4 Spindle

$429.99

Race Face Era E-Bike Carbon Cinch Crankarms The dawn of a new Era Made for the rigors of enduro, at a weight that’s in the class of an XC crank, the new Race Face Era Carbon Cinch E-Bike Crankarms are designed to handle the rigors of e-bike riding and are specific to Bosch G4 e-bike drivetrains. This high strength-to-weight ratio maximizes pedaling efficiency and holds up against bumps and scrapes, keeping the cranks rolling and ...

x

Race Face | Cinch Bb107 Bottom Bracket 41Mm Id X 107Mm Shell X 30Mm Spindle | Rubber

$59.99

Race Face Cinch BB107 Bottom Bracket The Race Face Cinch BB107 Bottom Bracket was designed for use with Race Face Cinch 30mm spindle cranksets. This bottom bracket includes an inner plastic sleeve and rubber seal that protects from water penetration. The Race Face BB107 features a 41mm inner diameter and weighs in at just 87 grams. Features41mm ID x 107mm Shell x 30mm Spindle Allows the use of a CINCH 30mm spindle crankset with Shimano ...

x

Wheels Manufacturing | T47 Bottom Bracket 24/22Mm Spindle, Sram Gxp

$110.00

Wheels Manufacturing T47 Bottom Bracket The T47 Bottom Bracket by Wheels Manufacturing uses Enduro Angular Contact bearings to give your cranks smooth, reliable rotation. The T47 is compatible with BB shells from 68mm to 132mm wide. Features Bearings Enduro Angular Contact Shell width 68-132mm Shell inner diameter 47 x 1. 0mm Threaded Crank spindle diameter 22/24, 24, and 30mm Weight 129g | Wheels Manufacturing | T47 Bottom Bracket 24/22Mm Spindle, Sram Gxp

x

Wheels Manufacturing | T47 Outboard Bb 24Mm Spindle, Shimano Standard

$110.00

Wheels Manufacturing T47 Outboard Bottom Bracket The T47 Outboard Bottom Bracket by Wheels Manufacturing uses Enduro Angular Contact bearings to give your cranks smooth, reliable rotation. The T47 Outboard is compatible with BB shells from 68mm to 100mm, and accomodates standard T47 shells. Features Bearings Enduro Angular Contact Shell width 68-100mm Shell inner diameter 47 x 1. 0mm Threaded Crank spindle diameter 22/24, 24, and 30mm Weight 155g | Wheels Manufacturing | T47 Outboard Bb ...

x

Race Face | Pf30 Bottom Bracket 30Mm Spindle, 83Mm

$59.99

RACE FACE PF30 BOTTOM BRACKETThe bottom bracket is the part that goes through your frame that your crankset is attached to. These bearings are essential to every bike, so make sure you don't get something that is inferior quality. The Race Face PF30 Bottom Bracket is designed with improved seals for extended life. They are designed for use with 2014 and newer Race Face cranks with 30mm spindles. Features Improved seals for extended life Designed ...

x

Cane Creek | Crank Preloader Turquoise

$35.99

CANE CREEK CRANK PRELOAD ADJUSTERCane Creek's ee Wing Crank Preload Adjuster is a CNC aluminum preload spacer adjuster designed for a variety of cranksets. It comes with a CNC aluminum thread ring and a titanium fastening bolt ensuring maximum durability and longevity. Cane Creek's ee Wing Crank Preload Adjuster is compatible with Race Face and SRAM 30mm spindles as well as DUB spindles. Features7075 aluminum preload spacer adjuster with 7075 aluminum thread ring Comes with ...