Home Nut Fastener

Nut Fastener

x

Park Tool | Tns-4 Star Nut Setter Tns-4 Start Nut Setter For 1 Or 1-1/8

$52.95

Park Tool TNS-4 Star Nut Setter Tool The TNS-4 Star Nut Setter easily fits 1" and 1-1/8" forks. With a precision machined sleeve and a comfortable grip, the Threadless Nut Setter is used to install the star-fangled nut found on Ahead Set® and other threadless headset systems. Thread the nut onto the TNS, insert into the fork stack, and tap it in with a hammer. Sets the star-fangled nut to 15mm into the steer tube ...

x

Fox Racing Shox | Float Air Shaft M8 Bottom Nut Lower M8 Nut For Air Shaft, 241-00-005

$3.50

Fox Racing Shox 2002-2008 32mm fork small parts Bottom Nuts Float Vanilla Manufacturer Part Number: 241-00-005 | Fox Racing Shox | Float Air Shaft M8 Bottom Nut Lower M8 Nut For Air Shaft, 241-00-005

x

Park Tool | Cnw-2 Chainring Nut Wrench Cnw-2

$5.95

Park Tool CNW-2 Chainring Nut Wrench This handy tool fits securely into the slots on the reverse side of a chainring bolt so it doesnt spin while you loosen the bolt. Designed specifically for the job, the revised CNW-2 (replaces CNW-1) makes removing chainring bolts much easier. Features Double-ended to fit most slotted-type nuts The outer width of both ends of the CNW-2 are nominally 12mm wide One end has a two outer tips nominally ...

x

Ks | Clamp Bolt Nut For Lev/dx/int/272

$5.99

KS Clamp Bolt Nut KS's Clamp Bolts and Nuts are required on thier seatposts to keep saddles secure. Seat clamp bolts load into this nut to hold the upper and lower seat clamps securely on your saddle rails. Specifications:Sold individually Compatible with LEV / DX / Integra / Supernatural posts5 Grams Made in Taiwan | Ks | Clamp Bolt Nut For Lev/dx/int/272

x

Shimano | Sh-A200 4-Hole Spd Cleat Nut | Silver | Sold As Single

$5.00

Shimano SH-A200 4-HOLE SPD Cleat Nut Did you get a little heavy handed with the tools and strip some threads? Perhaps you do a bit of hike a bike and your cleat nuts are just too mucked up to reuse. Replace them with a genuine Shimano part and get back into business. Keep pedaling. Features Replacement for discontinued Y40N0100 New version of SPD cleat plate allows more forward or aft cleat positioning | Shimano | ...

x

Magura | Sleeve Nut For Mt Brakes 10 Pcs

$17.60 20% off $22.00 msrp

Magura Sleeve Nut For MT Brakes Small Parts If you need small parts to install your hydraulic hose for Magura disc brakes, then you're in the right place. The Magura Sleeve Nut for MT Brakes comes in a bag of 10 and is only for MT brakes. Features Manufacturer's part number: 0724700Small parts used to install a hydraulic hose for Magura disc brakes Amount per bag: 10 | Magura | Sleeve Nut For Mt Brakes ...

x

Shimano | Sm-Sh51 Cleat / Nut Set Pair, Single Release Mode

$25.00

Shimano SM-SH51 Cleat Set Ready for your next dirt adventure? Nothing compares to the feel and confidence of new cleats. The Shimano SM-SH51 Cleat Set replaces old and worn cleats to have you feeling brand new again. With 4° of float, you can swing your heel out to unclip. These cleats come standard on most Shimano SPD (mountain bike style) pedals. Float: 4 deg Fits: Shimano SPD MTB-style pedals Bolt Pattern: SPD 2-bolt pattern Includes ...

x

Fox Racing Shox | Damper Nut 241-00-022

$9.00

FOX DAMPER NUTGOING NUTSSmall parts can be tough to find sometimes. Luckily, Jenson USA has the parts you need for whatever repair you're working on. The Fox Damper Nut is designed to work with the FIT4 damper. It is for use with the lower adjuster cover. Features Designed for use with the lower adjuster cover and the FIT4 damper Fox part number: 241-00-022 | Fox Racing Shox | Damper Nut 241-00-022

x

Foundation | Flat Pedal Replacement Pins Set

$3.94 12% off $4.50 msrp

Foundation Pedal Replacement Pins When a rock strikes your pedal while riding, chances are you are going to need some replacement pins. You are looking at replacement pins for the Foundation Aluminum and Foundation Composite pedals. The pin set comes with replacement pins and replacement nuts. The nuts are only needed for the composite pedals. The pins screw directly into the body of the aluminum pedals. The pins are black in color which matches the ...

Sale

$20.00 20% off $25.00 msrp

Quickview
x

Surly | Monkey Nuts 2.0

$20.00 20% off $25.00 msrp

SURLY MONKEY NUTSAWW NUTSThe Surly Monkey Nuts v2. 0 will position your wheel 14mm back from the front of the dropouts and are a simple non-permanent fix if you have a tire/derailleur overlap problem. Features For use with modern top or dual pull front derailleurs Compatible with quick-releaseor 10mm bolt-on axles PUlls the wheel back 14mm in dropouts | Surly | Monkey Nuts 2. 0

x

Wolf Tooth Components | Set Of 5 Chainring Bolts+Nuts | Gold | 6Mm

$29.95

Wolf Tooth Set of 5 Chainring Bolts + Nuts Totally Nuts Wolf Tooth makes some of the best single chainrings money can buy, and they do it all in-house in the USA. The Wolf Tooth 6mm Chainring Bolts are the perfect complement to your Wolf Tooth Drop Stop chainring or really any other single ring you might want to use. The Wolf Tooth chainring bolts use a large hex socket on both the bolt (5mm) ...

x

Wolf Tooth Components | 6Mm Chainring Bolts+Nuts 4Pc | Orange | 6Mm, 4 Pack | Aluminum

$24.95

Wolf Tooth 6mm Chainring Bolts+Nuts 4PCOnly The Best Wolf Tooth makes some of the best single chainrings money can buy, and they do it all in-house in the USA. The Wolf Tooth 6mm Chainring Bolts are the perfect complement to your Wolf Tooth Drop Stop chainring or really any other single ring you might want to use. The Wolf Tooth chainring bolts use a large hex socket on both the bolt (5mm) and nut (6mm), ...

x

Problem Solvers | Sheldon Fender Nuts 32Mm Front, 10Mm Rear

$15.99 27% off $21.99 msrp

A recessed brake nut for road brakes that has a longer threaded section for mounting fenders on your bike. Standeard 6mm brake nut with longer internal threading and extension on the back for a 6mm mounting bolt Install brake caliper normally, and mount fender to nut with a 6mm bolt Includes a 13mm front brake nut and a 10mm rear brake nut This pair of Fender Nuts should fit all steel and Aluminum road frames ...

x

Wolf Tooth Components | Compression Plug With Integrated Spacer Stem Cap Red

$24.95

Wolf Tooth Compression Plug with Integrated Spacer Stem Cap A premium compression plug that features an integrated spacer and stem cap. The Wolf Tooth Compression Plug with Integrated Spacer Stem Cap is made from 7075-T6 aluminum alloy and weighs in at just 38 grams. This compression plug was designed for use with carbon fiber bikes with steerer tubes of 1 1/8” in diameter. Features Material: 7075-T6 aluminum Compression plug with integrated stem cap and 5mm ...

x

Fsa | Compressor Sl Expander Plug With Cap | Black | 1-1/8", Alloy, For Carbon Steerer

$33.00

FSA compressor sl expander plug with cap The FSA compressor plug is used to tie together your carbon steer tube fork, headset, and stem. The compressor plug expands as you tighten it inside the forks steer tube creating a safe and secure fit. This is the solution for forks with carbon steer tubes since you never want to use traditional star nuts on carbon. Features Safe for use on carbon steer tubes Includes carbon cap ...