Home Pedal Fastener

Pedal Fastener

x

Wheels Manufacturing | Pedal Washers | Silver | 5 Pairs

$10.25

Wheels Manufacturing Pedal Washers Stop grinding your pedals into your crank arms. Protect your carbon arms from damage. You get the picture. Wheels Manufacturing Pedal Washers keep the twisting install motion of your pedals away from your crank arms. Enough for several bikes. Wheels Manufacturing Pedal Washers Specifications: Contents: 10 washers Size: 1. 2mm thick | Wheels Manufacturing | Pedal Washers | Silver | 5 Pairs

x

Shimano | Saint M800 Pedal Washers Pedal Washers

$2.99

Shimano Saint M800 Pedal WasherWashers have been around for hundreds of years and have many different purposes. A pedal washer is designed to ensure a good pedal to crank interface. The Shimano Saint M800 Pedal Washer is designed to fit the Shimano Saint FC-M800 Crankset only. They are sold individually. FeaturesDesigned for Shimano Saint FC-M800 cranksets onlySold individually | Shimano | Saint M800 Pedal Washers Pedal Washers

x

Spank | Replacement Pedal Pins Spike/Oozy/Spoon Pedal Pin Kit

$9.95

2015 pin kit is compatible with all previous generation Spike peals and includes 28 each 4x9mm pins and 4 each M4 bolts | Spank | Replacement Pedal Pins Spike/Oozy/Spoon Pedal Pin Kit

Sale

$10.79 10% off $11.99 msrp

Quickview
x

CrankBrothers | 5050 Pin Kit 10mm

$10.79 10% off $11.99 msrp

Crank Brothers 5050 Pin Kit If it's just about time to replace the old worn down pins on your Crankbrothers Mallet or 50/50 pedals than this is just what you need. This neat little kit contains replaceable pins for your pedals to bring back that fresh out the box feeling and keep you on the bike enjoying more shred-worthy moments. Crank Brothers 5050 Pin Kit Specifications length: short - 8mm | CrankBrothers | 5050 Pin ...

x

Race Face | PF30 X-Type Bottom Bracket 68mm/73mm for 24mm Spindle

$59.99

RACE FACE PF30 X-TYPE BOTTOM BRACKETJUST PRESS IT INYour bottom bracket is what keeps your pedals moving. Eventually, you will need to replace your bottom bracket in order to keep your bike running properly. The Race Face PF30 X-Type Bottom Bracket is compatible with 24mm spindle cranksets from Race Face, Shimano, and FSA. It positions the bearings externally with the same wide spacing as threaded external mountain bottom brackets. FeaturesAllows for the use of Race ...