Free Shipping Offer

Get free Standard Shipping with your $50 purchase today!

Please note this offer is only available to physical shipping addresses in the 48 continental United States (no PO Boxes), and oversize charges still apply on some heavy/large items.

|
|
WE'RE HIRING
Join the Team Today!
(26)

Hope Pro 2/ Evo Front Hub Conversion Kit

Item #: HU510Z00
USD$20.99 SAVE 35% USD$32.29 msrp
Qty
Found a Lower Price?

Hope Pro 2/ Evo Front Hub Conversion Kit

These conversion kits let you customize your Hope hubs to fit different dropout styles and widths. Front conversion kits work on both Pro 2 and Pro 2 Evo hubs. Rear conversions must specify Evo.
4.7 / 5.0
26 Reviews
5 Stars
4 Stars
3 Stars
2 Stars
1 Stars
22
2
1
1
0
Simple to use. Works perfectly.
Super simple, they just snap right in! Love the convertibility of hope hubs!
April 19, 2017
Purchased
6 months ago
Location:
San Luis Obispo
Easy conversion for hope hubs!
Easy conversion! Pop em in and change your ride! Makes it easy to swap wheel sets.
April 4, 2017
Purchased
11 months ago
Location:
Memphis
money saver
i had a good set of hope 2 hubs sitting around and a new bike, changed the qr to 15mm and im rolling
December 9, 2016
Purchased
10 months ago
Conversion Kits
Hope hubs are on par with many of the premium brands for a lot less $. The hubs are easily converted from different axle types in less than 30 seconds without tools. I ride ridgid bikes during the winter. I easily converted a 15mm thru axle to a 9mm thru bolt with this kit for my winter setup.

PROS: Easy To Install
January 2, 2013
Location:
Cincinnati, OH
Very easy to install, work great
I love my Hope Pro 2 hubs, but needed to upgrade to a 15mm through axle (Maxle) when I built up a new bike with a RockShox fork. These worked perfectly - quick and easy to install. A bit pricey, but absolutely necessary.

PROS: Durable, Easy To Install, Lightweight

BEST USES: Upgrade, Racing, Mountain Biking
October 27, 2014
Location:
Chicago, IL
One wheel for two bikes
Now I can use the same wheel and tyre in two differents bikes. One with 15 mm axle and other with standart QR 9 mm.

PROS: Easy assembly, cheap
September 17, 2012
Location:
Belo Horizonte, Brazil
The Best
These adapters made the purchase of a used hub a cost effective solution to a nagging problem. The original 'ends' pulled off and after a quick cleaning and servicing of the hub the new adapters were installed and the wheel was ready for new service.

PROS: Quality of fit, Ease of installation, Appearance
May 16, 2012
Location:
Phoenix, AZ
Great (as expected)
Simply pull off the other hub fittings with your fingers. Push these in with your fingers. Takes about 15 seconds. As always, grease is your friend.

PROS: Simple, Tool free
April 12, 2012
Location:
Reno, NV
Easy as Pie
I have a Hope Pro II EVO 20mm thur-axle front HUB and not have a 15mm QR front fork so i purchased this conversion kit. It did not come with any instructions on how to install but it was pretty self explanitory.

The 20mm cups are held in by metal retainer clips. There is a little notch taken out of one of the ends of the metal retainer clip. If you use a small flat head screw driver, you can pop the retainer clip right out. Once the retainer clip is out, you can pull the 20mm cup out of the HUB exposing the bearing. Take your 15mm cup and put a little grease on it and press it into the HUB over the bearing. There is no retainer clip for the 15mm cups so be careful not to let them fall out. Repeat for the other side, install your wheel and go ride!

This is a very simple and easy to convert HUB but it bothers me that there is no retention system for the 15mm cups like there are for the 20mm cups. Its not a huge deal but its nice for when you are on the trail and have to pull off your wheel for a flat, you wont accidentally lose the cup. Other then that awesome product!

PROS: Well Made, Easy To Install, Exact fitment, Rubber seals

CONS: No retention system

BEST USES: Hope Pro II Conversion, all-mountain
April 10, 2012
Location:
Sacramento, CA
Easy conversation
Great product... Converts front hub to 15mm

PROS: Easy To Install, Durable, Attractive Design

BEST USES: Mountain Biking, Upgrade, Racing
November 3, 2014
Location:
Raleigh, NC

Q & A

Start typing your question and we'll check if it was already asked and answered. Learn More
Browse 3 questions Browse 3 questions and 1 answer
Can this be used to convert a hope pro 4 20mm to 15mm
Caleb on May 24, 2016
will this conversion kit work for hope pro 4 hub?
A shopper on Dec 30, 2016
BEST ANSWER: Yes, this conversion kit works on both the Pro 2 EVO and the new Pro 4 hubs. You can confirm this by going to the Hope website. The full compatibility chart is under hubs/accessories then click through to manuals and instructions.
Can this applicable for Pro 4 front Hubs?
ThomaslkTang on Oct 17, 2016

Jenson USA ships worldwide, including APO/FPO addresses. For a quote, simply add the items you are interested in to your shopping cart and look for the "Shipping Options" box. You don't have to login or create an account to see shipping charges.

Some manufacturers restrict where we can ship their products. If this item has shipping restrictions, they are listed below. If you'd like to buy an item that we cannot ship to your preferred address, we can accept your foreign credit card and ship to a USA address for you.

Get free shipping with your $50 purchase today when you choose Standard Shipping at checkout. Please note this offer is only available to physical shipping addresses in the 48 continental United States (no PO Boxes), and oversize charges still apply on some heavy/large items

Related Products
DT 240S Left Adaptor MTN QR Hubs
This left adaptor end cap for DT Swiss ...
DT 240S Left Adaptor MTN QR Hubs
DT 240S Left Adaptor MTN QR Hubs
Description:
This left adaptor end cap for DT Swiss fits most DT Hubs including the 240, 350 and 440 and is also compatible with the Spline series of wheels. Choose the appropriate right side adaptor, (sold separately) depending on whether you ...
DT Swiss 135X12 Or 150X12 End Caps
DT Swiss 135X12 Or 150X12 End Caps Keep ...
DT Swiss 135X12 Or 150X12 End Caps
DT Swiss 135X12 Or 150X12 End Caps
Description:
DT Swiss 135X12 Or 150X12 End Caps Keep those DT Swiss wheels rolling and in service with a set of endcaps. These will let your standard 135mm QR fit either a 12x135mm frame or a 12x150mm frame. Compatible with 2011 ...
Gusset Single Speed Conversion Kit
Go singlespeed the easy way with this kit ...
Gusset Single Speed Conversion Kit
Gusset Single Speed Conversion Kit
Description:
Go singlespeed the easy way with this kit from Gusset! Why bother with expensive, dedicated singlespeed hubs? With this kit you can use any standard Shimano 8/9 speed compatible freehub. Simply slide on cog, sandwich between the two spacers and ...

Need Gear Advice?

Our Gear Advisors are Ready to Help

Email Specials

Sign up for our weekly newsletter delivered via email.

Keep Pedaling

Free Shipping Offer

Get free Standard Shipping with your $50 purchase today! Just choose Standard Shipping during checkout.

Please note this offer is only available to physical shipping addresses in the 48 continental United States (no PO Boxes), and oversize charges still apply on some heavy/large items.