What a difference these made in the performance of my brakes. My old cables were probably original to the bike, which is over 10 years old. Cheap fix for the improvement made and I have enough left over to do my wife' s bike too.

Bought new frame and replaced cables and housing on shifters. After replacing I noticed a huge improvment in the performance of the shifters

Kit includes everything you need to completely replace your shifter(s) cable and housing. Cable ends, housing ends and various other small parts included. Great buy.

Great product. Has kept all my 9 speed road and mountain shifters snapping through the gears perfectly.

Excellent quality and complete. Very smooth. I have Park cable cutters which makes cutting no problem at all with only a minimum of deburring for a professional job. In the past I have used my dremel with a cut-off disc. That also works. Ordinary cutters should NOT be used.

This is a great kit. The housing is pre-lubed, so you don't have to buy anything else. There is plenty of cable and housing for even the largest frames. The cables have both types of brake lever attachments (just clip off the end you don't need). Cable end crimps, rubber "doughnuts", and a sticker included.

Installed these on a cyclocross/commuter that I built. Couldn't be happier. Cables are per-stretched and lubed. They were easy to cut and install. After 200 miles I've had no issues. Feels like almost no resistance when the cable moves. My only complaint is that the front derailleur cable was barely long enough. I ride a large frame, so this may not be an issue for most people, but double check your length if you have a large frame or have an unusual cable routing.

Installed these on a cyclocross/commuter that I built. Couldn't be happier. Cables are per-stretched and lubed. They were easy to cut and install. After 200 miles I've had no issues. Feels like almost no resistance when the cable moves. After I get some more Miles on them I might buy a different color, as jagwire makes a full line of color options. I was just in a hurry to finish the bike.

On top of the fact that the wires are stainless steel and the housing is high quality, the kit provides donuts to protect the frame along the top-tube, and even a rubber piece to keep water from running down the rear derailleur cable into the cable housing. These wires do fray easily, but that's easily remedied by cutting with cutters that have curved blades, and then capping the wire immediately after installation.

I installed both the derailleur and brake cables on a 19 in Jamis Dakar with BB7 brakes and Sram X9 drivetrain. There was more than enough cable length for even the largest bikes with the most convoluted cable routing.

The ferrules in this kit are a nice durable design that wont break off in your cable guides (unlike some alligator ferrules) and the frame guards are a nice touch to save the paint on your headtube.

The best attribute of these cables is that I don't notice them. They do their job and seem to have lower friction than "low friction" cables of twice the cost. If you really need virtually no friction, go with Gore RideOn cables, otherwise you wont find much better than these.