(888) 880-3811 (888) 880-3811
Show Prices In:

Aluminum Stem

$204.45

Quickview
x

Deda Trentacinque Stem

$204.45

Deda proclaims right on the side of their Deda Trentacinque stems that stiffness and strength comes with a 35mm clamping diameter. The 3-D super forged 2014 aluminum carries a large chunk of that load, but the oversize clamp combined with the oversize Deda handlebars make it a favorite of powerful riders. CHAR(13) + CHAR(10) 136g (110mm) 9 degree rise 35mm handlebar clamp diameter
View More

$14.99 50% off $29.99 msrp

Quickview
x

Race Face Ride Stem OE 2010

$14.99 50% off $29.99 msrp

The Race Face Ride stem is made of 6061 forged and shot peened aluminum for strength and durability. The 4 bolt clamp securely holds your bar in place. The machined logo on the bar clamp add a little high end detail to this value oriented stem. "OE" products are new but may be missing original box. CHAR(13) + CHAR(10) Claimed weight: 175g (110mm with 25.4mm bar) Suggested Use: XC/Trail 31.8mm Rise: +or-6 degrees Stack Height: ...
View More

$104.99

Quickview
x

Deity Locust Direct Mount Stem

$104.99

The Deity Locust Direct Mount Stem is super wide with a 65mm clamping platform for maximum stiffness. The cross beam design keeps the Locust DM Stem lightweight and with uncompromised durability. The low profile design provides a true zero degree handlebar position. Featuring a high polished finish with chamfer detailing throughout the Locust Direct Mount Stem sports a sleek and stylish look that will be sure to turn the heads of your fellow trail riders. ...
View More

$47.00

Quickview
x

Truvativ Aka All Mountain Stem

$47.00

If an XC-only stem is too wimpy but a super-beefy DH stem is overkill for your trail riding adventures, the AKA might be just the right fit. Crafted with super-stiff forged 7050 aluminum in a minimalist design, the AKA does double duty as an XC or all-mountain stem. It’s lighter than many XC stems on the market, but throw some wide bars on it and point it down your sketchiest trail and you’ll see where ...
View More

$52.80

Quickview
x

Deda QUATTRO2 Stem

$52.80

The Deda Elementi Quattro 2 stem is ideally suited to be mated to your road bike and then pushed to the limit during every stop sign sprint or at your local races. Deda uses an oversize 31.7mm handlebar clamp for increased strength and stiffness. The 3D forged 6061 aluminum keeps the weight low without compromising any strength. 166g (claimed) 9 degree rise 6061 aluminum 31.7mm handlebar clamp diameter
View More

$25.49 15% off $29.99 msrp

Quickview
x

Race Face Ride Stem

$25.49 15% off $29.99 msrp

The Race Face Ride stem is made of 6061 forged and shot peened aluminum for strength and durability. The 4 bolt clamp securely holds your bar in place. The machined logo on the bar clamp add a little high end detail to this value oriented stem. CHAR(13) + CHAR(10) Claimed weight: 175g (110mm with 25.4mm bar) Suggested Use: XC/Trail 31.8mm Rise: +or-6 degrees Stack Height: 40mm
View More

$60.00

Quickview
x

Truvativ Holzfeller Stem

$60.00

Whether you’re trying to hold your line on a jackhammer descent or stick a landing on a 20-foot gap jump, you need confidence and control. The heart of the beefy Holzfeller Stem is its 6066 aluminum body, 3D forged into a thing of beauty with all-new graphics. It takes design cues from the lighter AKA Stem, but has added strength for the most extreme DH and Freeride situations. The Holzfeller features a 2-bolt steerer clamp ...
View More

$39.99

Quickview
x

Race Face Evolve Stem

$39.99

2013 Race Face Evolve Stem Race Face builds the Evolve Stem from forged and blasted 6061 aluminum to keep it strong and durable at a reasonable weight. The faceplate eliminates �stress risers� wich could damage your bars and lead to failure. This high performing stem is ready to handle serious �All-Mountain� riding and is competitively priced with a race ready weight (167 g for 110mm). Forged and Blasted 6061 Aluminum XC/Trail/AM 6 Degree Rise 31.8mm ...
View More

$69.99 26% off $94.99 msrp

Quickview
x

Race Face Atlas FR Direct Mount Stem

$69.99 26% off $94.99 msrp

Atlas FR Direct Mount Lock it down with our new Direct Mount stem! Designed with the extreme gravity set in mind, the Atlas FR Direct Mount stem gives you 2 stems in one. Mount upright and you have a race ready short 30mm stem. Flip the stem to the 50mm length position and youll lower your cockpit another 15.5mm. Aggressive versatile and unique, the Atlas FR direct mount is another RF industry first. Machined from ...
View More

$89.99

Quickview
x

Thomson Elite X4 MTB Stem

$89.99

The Thomson Elite Stem is machined7000-series extruded bar stock with custom heat-treated and corrosion resistant bolts intended for mountain use. Weight: 200 grams (110mm) Material: Extruded, Machined 700 Aluminum Feature: Internal steerer clamp, Four bolt plate Clamp Size: 31.8
View More

$100.00

Quickview
x

Easton Havoc 35 Stem 2014

$100.00

Easton Havoc 35 Stem 2014 The Havoc 35 line was made for riders who go bigger than current all-mountain products can handle. By borrowing from their experience in motocross bar design, Easton�s beefed up the handlebar clamp diameter to 35mm to provide a much stronger, stiffer, and more secure handle on the bars. Constructed of fully CNC machined EA90 grade aluminum the Easton Havoc 35 stem features Top Lock Technology™ and Distributed Stress Technology™ to ...
View More

$59.99

Quickview
x

Kore Repute Stem

$59.99

Kore wanted a technically advanced stem that was strong enough for your gravity oriented bike, but light enough to ride all-mountain. With the Kore Repute Stem they started out with aerospace grade aluminum and CNC machined the stem until they were satisfied that they produced a stem that would be ready for the most extreme rides. Offered in 35mm and 50mm lengths in a highly polished black. 35mm and 50mm lengths 31.8mm clamp 1 1/8� ...
View More

$6.99 82% off $39.95 msrp

Quickview
x

Azonic ORS 25.4mm Stem

$6.99 82% off $39.95 msrp

The Azonic ORS stem gives you a full aluminum stem with a 2-bolt handlebar clam for a secure grip on your handlebars. These stems are designed for handlebars that have a 25.4mm diameter, making it a great choice for bikes with older mountain bike bars or cruiser bars. Aluminum construcion 25.4mm handlebar clamp diameter 1 1/8 Inch steerer clamp 5� rise
View More

$100.00

Quickview
x

Easton Havoc 35 Direct Mount Stem 2014

$100.00

Easton Havoc 35 Bolt-On Stem 2014 Easton's Havoc 35 Bolt-On stem is the very best gravity stem money can buy. Weighing in at just a little more than 100g, the Havoc 35 Bolt-On stem is one of the lightest stems Easton makes. The 35mm bar clamp diameter provides a much stronger, stiffer, and more secure handle on the bars allowing you to shred to your heart's desire. Constructed of fully CNC machined EA90 grade aluminum ...
View More

$100.00

Quickview
x

Easton Havoc Direct Mount Stem 2014

$100.00

Easton Havoc Stem 2014 The Havoc Bolt-On stem is one of the most intricately machined, perfectly executed stems ever made. Easton managed to pack some power in this 135g punch to your gravity bike making this stem not only light but as stiff as a fire hydrant. Made to fit Fox 40 and RockShox Boxxer forks, the Haven Bolt-On steam is CNC machined from a solid block of EA90 grade aluminum and features Easton's Top ...
View More

$80.75 14% off $94.99 msrp

Quickview
x

Race Face Atlas Direct Mount Stem

$80.75 14% off $94.99 msrp

A Race Face first, the Atlas Direct Mount Stem is designed with the gravity set in mind. The Atlas is two stems in one, Mount it upright and it�s a race ready short 30mm stem. Flip the stem to the 50mm side and lower your cockpit 15.5mm. This 6061 aluminum stem has a 4 bolt clamp that transfers more load through the stem body and not the bolts. Available in Boxer direct mount standard. CHAR(13) ...
View More

$99.99 15% off $118.80 msrp

Quickview
x

Blackspire Das Direct Mount Stem

$99.99 15% off $118.80 msrp

The Blackspire DAS Direct Mount stem is designed for downhill and freeriding. Constructed from strong CNC'd 6061 T-6 aluminum, the Das will mount to your Boxxer or Fox 40 fork. Length: 45mm Rise: 0 degrees Clamp: 31.8mm Weigh: 145g (claimed)
View More

$89.99 10% off $99.99 msrp

Quickview
x

Race Face Atlas Stem

$89.99 10% off $99.99 msrp

The Race Face Atlas stem is made of 6061 forged and shot peened aluminum for strength and durability so it is light enough for all-mountain and strong enough for free ride/downhill. The 4 bolt clamp securely holds your bar in place while the opposing bolts on the steerer tube clamp provides strong clamping grip while reducing stress on the steerer tube. Zero rise is the only option and the Atlas comes in blue, red, and ...
View More

$6.99 82% off $39.95 msrp

Quickview
x

Azonic XRC 25.4mm Stem

$6.99 82% off $39.95 msrp

Azonic XRC 25.4mm Stem The Azonic XRC stem gives you a full aluminum stem with a 3-bolt handlebar clam for a secure grip on your handlebars. These stems are designed for handlebars that have a 25.4mm diameter, making it a great choice for bikes with older mountain bike bars or cruiser bars. Aluminum construcion 25.4mm handlebar clamp diameter 1 1/8 Inch steerer clamp 5° rise
View More

$80.99 10% off $89.99 msrp

Quickview
x

Azonic Pleasure Dome Stem

$80.99 10% off $89.99 msrp

Azonic Pleasure Dome Stem A perfect choice for those looking for a stem that can stand up to the abuse of bold downhill and freeride shredding, the Azonic Pleasure Dome is CNC machined from 6061 TG aluminum for a long life of abuse. Features: CNC Machined 6061 T6 Aluminum Waterslide logos 31.8mm bore diameters 1 1/8 Inch steerer clamps 50mm extension 35mm stack height 0� rise Weight: 210g including screws
View More

$74.00

Quickview
x

Kore Repute 35 Stem

$74.00

Kore Repute 35 Stem Designed for use with 35mm diameter bars, the Repute 35 stem is lightweight and super strong. The Kore Repute 35 is forged from 6061 T6 Aluminum then CNC�d to exact specifications. The precision and craftsmanship that goes into the Repute sets a standard that is hard to match. Material is CNC�d out in areas where there is little stress. This saves on weight and often ads to the style and appeal ...
View More

$77.99 0% off $78.00 msrp

Quickview
x

Deity Fantom V2 Stem

$77.99 0% off $78.00 msrp

The Deity Fantom V2 stem is made from durable 6061 T6 aluminum. The solid aluminum construction promotes stiffness while remaining lightweight. The stem is 50mm in length which is a proven length that is versatile across many different Dirt Jumper frame geometries. A true zero degree rise keeps the front end lower than most on the market. The Deity Fantom is the perfect upgrade for anyone interested in light weight and strong parts. 31.8mm Clamp ...
View More

$34.55

Quickview
x

Dimension Threadless 31.8 Stem

$34.55

Dimension gives you a fully forged 6061-T6 aluminum stem with a 4-bolt handlebar clam for a secure grip on your handlebars. These stems are designed for handlebars that have a 31.8mm diameter. These stems are not intended by Dimension to be used with carbon handlebars or carbon steerer tubes. Use: Road Clamp: 31.8mm Rise: 7�, 17� or 55� Length: 70-120mm
View More

$15.50

Quickview
x

Kalloy Tri/Mtn Quill Stem - 1"

$15.50

The Kalloy AL-222 Stem is constructed of forged aluminum with a cable stop, this is a great entry level quill stem, that is a good blend of value and performance.. Material: Forged aluminum Quill Insertion Diameter: 22.2 for 1" stems Weight: 374 g Bar Clamp Diameter: 25.4 mm Stem Angle: 115 deg Stem Length: 100 mm Steerer Tube: 1" Threaded
View More

$80.99 10% off $89.99 msrp

Quickview
x

Azonic Club Direct Mount Stem

$80.99 10% off $89.99 msrp

Azonic Club Direct Mount Stem The Azonic Club Stem is a bonafide gravity stem, built for Downhill pandemonium. As a direct mount stem, the Club Stem offers better bar to fork contact for more stiffness upfront, plus you won�t have to mess with steering alignment during installation. CNC Machined from 6061 T6 Aluminum, the Club Stem adds strength where it�s needed, while removing excess material where it�s not needed to keep weight minimal. 0 degrees ...
View More

$60.00

Quickview
x

Salsa Pro Moto 2 Stem

$60.00

Salsa Cycles Pro Moto 2 Stem is a strong and light 4-bolt stem that will be a great addition to your cockpit. The one tool installation, S.U.L. II system with a wide, stress reducing faceplate, make the Salsa Pro Moto 2 stem a great piece for your bike. Construction of the Pro Moto 2 is made from 3D-forged and CNC-machined 2014-T6 aluminum with a 4-bolt aluminum faceplate. 31.8mm Handlebar Clamp 2014-T6 Aluminum 5 Degree or ...
View More

$55.99

Quickview
x

Flybikes Potencia Stem

$55.99

The Flybikes Potencia Stem is a strong stem that is constructed with CNC machined 6061-T6 aluminum, and uses Solid heat treated cromoly bolts making this a solid and reliable stem. Published Weight: 250 g Intended Use: BMX Bar Clamp Diameter: 22.2 mm Steerer Tube: 1-1/8" Threadless
View More

$34.55

Quickview
x

Dimension Threadless 26.0 Stem

$34.55

Dimension gives you a fully forged 6061-T6 aluminum stem with a 4-bolt handlebar clam for a secure grip on your handlebars. These stems are designed for handlebars that have a 26.0mm diameter. These stems are not intended by Dimension to be used with carbon handlebars or carbon steerer tubes. Use: Road Clamp: 26.0mm Rise: 7�, 17� or 55�
View More

$30.00

Quickview
x

Civia Bryant Stem

$30.00

Civia Bryant Stem The Civia Bryant Stem is an elegant looking stem that was designed to complement the Civia Bryant bikes lines, but can be used in conjunction with your 26.0mm handlebar. The beauty of the Civia Bryant Stem is in the deep polish and smooth curves. The forged aluminum body and 4 bolt face plate add strength and stiffness to aid in precise steering. 1 1/8 steerer clamp 26.0mm handlebar clamp 7� rise
View More

$124.99

Quickview
x

Hope Direct Mount Stem

$124.99

This is the "go to" direct mount stem for your big hit bike! The IS fixing 4 bolt design is a great way to drop some weight, keep the front end low and avoid those twisted bar moments. Compatible with Boxxer and Fox 40 original crowns CNC machined from solid billet 2014 T6 aluminum Made in Barnoldswick, England Ti bolts 31.8mm bar clamp
View More

$71.99 10% off $79.99 msrp

Quickview
x

Azonic Riot Stem

$71.99 10% off $79.99 msrp

Azonic Riot Stem The Azonic Riot stem is a bombproof centerpiece for your rig's cockpit! CNC machined from 6061 T6 Aluminum, the Riot is a heavy-duty short reach stem that is perfect for downhill/freeride use. Lazer etched logos give the Riot a modern touch and the 31.8mm handlebar clamp diameter ensures compatibility with most mountain handlebars. Features: CNC Machined 6061 T6 Aluminum Laser etched logos 31.8mm handlebar clamp diameter 1 1/8 Inch steerer clamps 40mm ...
View More

$30.00

Quickview
x

Civia Midtown Stem

$30.00

Civia Midtown Stem The Civia Midtown Stem is an elegant looking stem that was designed to complement the Civia Midtown bikes lines, but can be used in conjunction with your 25.4mm handlebar. The 17� rise give you a little more of an upright position while on the bike for more comfort and better vision. The beauty of the Civia Bryant Stem is in the deep polish and smooth curves. The forged aluminum body and 4 ...
View More

Free Shipping Offer

Get free Standard Shipping with your $50 purchase today! Just choose Standard Shipping during checkout.

Please note this offer is only available to physical shipping addresses in the 48 continental United States (no PO Boxes), and oversize charges still apply on some heavy/large items.