Santa Cruz Bicycles

Santa Cruz Bicycles was established in 1994 in a small space akin to a two-car garage at 104 Bronson Street in Santa Cruz, California. Within the vibrant Seabright Cannery industrial complex, alongside Santa Cruz Skateboards, RockShox and various other creative entities the brand thrived in an eclectic and innovative environment. Introducing their pioneering Tazmon model, a dual-suspension bike that challenged conventional norms, Santa Cruz Bicycles propelled itself into the forefront of the full-suspension era. Today, after three decades of bike development, they continue to push boundaries while embodying simplicity and advancement. A few notable models include:

NOMAD

The Santa Cruz Nomad is a 170mm travel monster that will conquer all the trails that are placed in front of it. It is built upon a Carbon frame and has an updated lower-link mounted shock configuration. The shock has amazing small bump sensitivity, a supportive mid-stroke, and overall progression that would normally only be found on a downhill mountain bike.

Built for: Enduro, Park  Frame Travel: 170mm  Wheel size: Mx 29" front; 27.5" rear

MEGATOWER

The Santa Cruz Megatower is an all-mountain/enduro bike that conquers the ups and the downs. It has a Carbon frame that uses 170mm of travel on the front and 165mm of travel on the rear. Lower-link VPP suspension provides an efficient ride so you can sprint up the hills and shred the descents. If you're looking for a Park/DH bike that has some pedaling efficiency, add this one to your list.

Built for: Enduro, All-mountain  Frame Travel: 165mm  Wheel size: 29"

BRONSON

With 150mm of VPP travel on 27.5-inch wheels, the Bronson continually rides the sharp edge between agility and stability. Ideal for negotiating tech-gnar one moment and fast flowing terrain the next, the 160mm fork travel and 65-degree head angle ensure handling remains refined. 

Built for: Enduro, Trail  Frame Travel: 150mm  Wheel size: Mx 29" front; 27.5" rear

HIGHTOWER

With 145mm of VPP travel, the Hightower was born to the meet demands of our Enduro World Series race team and designed for maximum speed in big terrain.  Matched with a 150mm fork, the 29in-wheeled Hightower is travelled-up and pared-down for pure performance. It rolls up its sleeves for high speed, big hit pedigree.

Built for: Enduro, Trail  Frame Travel: 145mm  Wheel size: 29"

5010

A laser sharp, agile trail whip that turns on a dime and loves to pop and play. The 130mm-travel 5010 sports short chainstays and a low BB for a uniquely playful character and an insatiable appetite for negotiating steep, technical climbs. When it’s time to descend, the bike’s 66.2/66.5-degree head tube angle (adjusted via flip chip) and generous reach/short stem combo equate to precise, confident handling.

Built for: Trail  Frame Travel: 130mm  Wheel size: Mx 29" front; 27.5" rear