Home 30 Mm Bottom Bracket

30 Mm Bottom Bracket

x

Race Face | BSA 30mm Bottom Bracket 68/73mm, 30mm Spindle

$59.99

RACE FACE BSA 30MM BOTTOM BRACKETThe bottom bracket is the part that goes through your frame that your crankset is attached to. These bearings are essential to every bike, so make sure you don't get something that is inferior quality. The Race Face BSA 30mm Bottom Bracket is designed with improved seals for extended life. They are designed for use with 2014 and newer Race Face cranks with 30mm spindles. FeaturesImproved seals for extended lifeDesigned ...

x

Hope Technology | 68/73mm 30mm Bottom Bracket | Black | 30mm Spindle, 68/73mm Threaded

$111.99 13% off $130.00 msrp

Hope 68/73mm 30mm Bottom Bracket Keep your 30mm crankset turning over smooth and fast by upgrading to the Hope 68/73mm 30mm Bottom Bracket. The machined aluminum cups hold stainless steel cartridge bearings inside stainless steel races, providing a much greater life span than stock units. The Hope 30mm bottom bracket allows the use of any 30mm crankset within a BSA threaded BB shell of 68mm, 73mm or 83mm, meaning it can be used on select ...

x

Race Face | BB92 30mm Bottom Bracket 2018 BB92, 30mm Spindle

$59.99

Race Face BB92 30mm Bottom Bracket The Race Face BB92 30mm Bottom Bracket allow the use of Race Face cranks with CINCH technology to be used on bikes designed with BB92 press fit bottom bracket shells. Features: Custom 19 ball flanged retainer bearings Allow the use of a 30mm spindle with Shimano press fit shells without decreasing ball bearing size Bearings races are fully coated for improved corrosion resistance Bearings are factory filled with Phil ...

x

Chris King | ThreadFit 30mm Bottom Bracket Matte Turquoise

$188.00

Chris King Threadfit 30mm Bottom BracketChris King prides their bottom brackets on the steel sealed bearings which are authentically made in-house. The meticulous process of crafting the signature bearings ensures uncompromised durability and smoothness. The ingenious angular contact bearing design allows the bearings to adapt as they are broken in, to prevent elongated wearing. The Chris King Bottom Bracket is easy to reapply grease and flush, with the use of a Chris King injector tool ...

x

Wheels Manufacturing | Pressfit 30 Fat BB Fat Bike Bottom Bracket for 30mm Cranks

$110.00

Wheels Manufacturing Pressfit 30 Fat BBThis is a fat bottom bracket! This means you must have a 46mm inner bottom bracket diameter with a width of 100mm. This specific bottom bracket also only works BB30 cranksets with a 30mm spindle. This BB features durable angular contact bearings and threaded machined cups for extra stability. You can’t find a better, more dependable bottom bracket for all your fat bike adventuring. If you like simple installation, increased ...

x

Race Face | PF30 30mm Bottom Bracket - No Packaging PF30, 68/73mm, 30mm Spindle

$34.94 41% off $59.99 msrp

RaceFace PF30 Cinch 30mm Bottom BracketThe RaceFace PF30 bottom bracket is a worthy upgrade for your PressFit 30 bike with a 30mm spindle Cinch crankset. The CNC machined alloy cups are manufactured to precision tolerances for a quiet, creak-free fit. The 6806 cartridge bearings feature wiper seals and waterproof grease to extend the life of the bearings. While a center plastic sleeve further protects against water ingress, keeping things from getting too messy in poor ...

x

Chris King | Bottom Bracket Tools T47 Bottom Bracket - 30mm

$54.00

Chris King bottom bracket tools When working with high end componentry such as Chris King, it is important to have the correct tools. Chris King designs and manufactures a series of tools that are made to work with specifically with their components. By using these high quality tools, you will be ensuring proper installation and optimum performance of your Chris King components. The Chris King Bottom Bracket Injector Tools are designed specifically for use with ...

x

Easton | Press Fit 30 Bottom Bracket PF 30 for 30mm Spindle

$59.99

Easton Press Fit 30 Bottom BracketThe Easton Press Fit 30 Bottom Bracket was made to work with their new Cinch interface system. The Cinch system uses a 30mm spindle to provide a stiffer bottom bracket/crankset interface. If you've got one of the new Easton EC90 SL cranks and a PF30 frame, this is what you need! FeaturesStandard 6806 retainer bearingsBearings are external to the BB shell resulting in a stiffer wider stanceBearings are factory filled ...

x

Chris King | ThreadFit 30mm Ceramic BB Red

$265.00

CHRIS KING THREADFIT 30MM CERAMIC BBBuilt on the familiar BSA threading, the ThreadFit™ 30 is ready. A silky smooth, long-lasting bottom bracket built around Chris King’s angular contact bearings that wear in instead of out. The ThreadFit™30 is made for 30mm spindles. Fully serviceable and backed by their 5-year built-to-last warranty this bottom bracket will outlast your bike. Built to ultra tight aerospace tolerances they use machined Delrin spindle sleeves to create a perfect, and ...

x

Race Face | PF30 Bottom Bracket 30mm Spindle, 83mm

$59.99

RACE FACE PF30 BOTTOM BRACKETThe bottom bracket is the part that goes through your frame that your crankset is attached to. These bearings are essential to every bike, so make sure you don't get something that is inferior quality. The Race Face PF30 Bottom Bracket is designed with improved seals for extended life. They are designed for use with 2014 and newer Race Face cranks with 30mm spindles. FeaturesImproved seals for extended lifeDesigned for 2014 ...